Waterway NEO 2100 Instruction Manual - page 7
SETTING SCREENS:
•
ROTATE VIEW: rotate the view 180 degrees, the UP and DOWN button also swap when rotated. With ROTATE VIEW
highlighted press MENU to enter ROTATE VIEW setting. Use UP/DOWN to select the desire setting and RETURN to exit and
confirm the setting.
•
SPECIAL TEMP: to temporarally heat spa to 105°F or 106°F once, and return to previous temperature setting. With
SPECIAL TEMP highlighted press MENU to enter SPECIAL TEMP setting. Use UP/DOWN to select the desired setting and
RETURN to exit and confirm the setting.
•
HEAT MODE: select STANDARD heating mode for most users or ENERGY SAVING mode (reduces polling for water
temperature) or VACATION mode (set temp set to 50
°F). With HEAT mode highlighted press MENU to enter HEAT mode
setting. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
FILTER CYCLES: set up filter cycle start time, duration and date for filtering the spa. For FILTER CYCLE 1 and 2, if duration
is set to zero the system will do a purge cycle at the start time setting. With FILTER CYCLE highlight press MENU to enter
FILTER CYCLE 1, 2, 3, or 4 setting. Select a FILTER CYCLE and press MENU again to enter TIME/DURATION setting screen.
In this screen, press MENU to move between HOURS, MINUTES and DAYS setting; UP/DOWN to change the values and
RETURN to exit and confirm the setting.
•
DATE-TIME: set up date and time for the spa. With DATE-TIME highlighted press MENU to enter DATE-TIME setting.
In this screen, pressing MENU will move and highlight various fields that can change the setting; UP/DOWN to change
the values and RETURN to exit and confirm the setting.
•
DEGREE F/C: displays spa temperature in Celsius or Fahrenheit. This option is only available for 60 Hz countries and
automatically displays Celsius for 50 Hz. With DEGREE F/C highlighted press MENU to enter DEGREE F/C setting. Use UP/
DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
TIME DISPLAY: display spa time in AM/PM or 24 hours time. With TIME DISPLAY highlighted press MENU to enter TIME
DISPLAY setting. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
DEVICES TIMEOUT: allows changes to timeout setting for various devices. LIGHT can set to a maximum of 4 hours;
PUMP in high speed and BLOWER can be set to a maximum of 1 hour; and PUMP in low speed can set to a maximum of
2 hours. With DEVICES TIMEOUT highlighted press MENU to enter and select various devices setting. Use UP/DOWN to
select the desired time setting and RETURN to exit and confirm the setting.
•
PANEL LOCK: locks all panel buttons except MENU button. With PANEL LOCK highlighted press MENU to enter PANEL
LOCK setting. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
TEMP LOCK: locks TEMPERATURE setting with UP/DOWN buttons. With TEMP LOCK highlighted press MENU to enter
TEMP LOCK setting. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
SERVICE MODE: only available for Authorized Dealers and Spa Manufacturer.
•
DEMO MODE: to demonstrate all device capabilities of the spa. With DEMO MODE highlighted press MENU to enter
MODE setting. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
GENERAL INFORMATION: displays general information for the spa. With GENERAL INFORMATION highlighted press MENU
to enter GENERAL INFORMATION menu. Use UP/DOWN to view different pages and information and RETURN to exit the page.
•
LANGUAGES: to select various languages for the spa display. With LANGUAGES highlighted press MENU to enter and
select a specific language. Use UP/DOWN to select the desired setting and RETURN to exit and confirm the setting.
•
SERENITY MODE: to turn off all outputs and provide a quiet time setting. With SERENITY MODE highlighted press MENU
to enter and select a specific time. Use UP/DOWN to select the desire time setting. Press MENU again to navigate to
EXIT/START. Select the desired option and RETURN to exit and confirm the setting.
•
ENERGY INTERVAL: only available for Non-Circ systems. With ENERGY INTERVAL highlighted press MENU to enter ENERGY
INTERVAL setting. Use UP/DOWN to select the desired minutes setting and RETURN to exit and confirm the setting.
•
SILENT TIME: only available for Non-Circ systems. Set up the time for no polling. With SILENT TIME highlighted press
MENU to enter SILENT TIME setting. In this screen, pressing MENU will move and highlight various fields that can change
the setting; UP/DOWN to change the values and RETURN to exit and confirm the setting.
•
CLEANER CYCLE: only available for Non-Circ systems. To turn on filtration after using the spa for short cleaning period.
With CLEANER CYCLE highlight press MENU to enter and select a specific duration. Use UP/DOWN to select the desired
time setting. Press Menu again to navigate to Exit/Start. Select the desired option and RETURN to exit and confirm the setting.
7