WBS AV6201A openGear User Manual - page 6
Introduction
Overview
The AV6201A is an analog video distribution amplifier with a differential input designed for broadcast use. It
can provide up to eight outputs when used with a single card rear module, and up to four outputs when used
with a double card rear module in an OG3FRC frame. The AV6201A can be addressed through Dashboard
to report card status and activate features. The AV6201A is housed in the openGear OG3FRC series
frames.
Functional Block Diagram
Figure 1. Simplified Block Diagram of the AV6201A Functions
Features
The following features make the AV6201A the best solution for analog video distribution.
•
Equipped with a differential input
•
Offers input clamping
•
Has a +/ 3 dB trim range to match levels
•
Higher density with up to 20 cards in an OG3FRC frame
•
Handles NTSC or PAL composite signals
•
5 year warranty
•
Fits all openGear OG3FRC series frames
Documentation Terms
The following terms are used throughout this guide:
•
“
Frame
”
refers to the
OG3FRC series
frame that houses the
AV6201A
card.
•
“
Operator
”
and
“
User
”
refer to the person who uses the
AV6201A
.
•
“
Board
”
, and
“
Card
”
refer to the
AV6201A
card itself, including all components and switches.