WBS AV6201A openGear User Manual - page 7
Installation and Setup
Static Discharge
Whenever handling the AV6201A and other related equipment, please observe all static discharge
precautions as described in the following note:
ESD
Susceptibility
Static discharge can cause serious damage to sensitive semiconductor devices. Avoid
handling circuit boards in high static environments such as carpeted areas, and when
wearing synthetic fiber clothing. Always exercise proper grounding precautions when
working on circuit boards and related equipment.
Unpacking
Unpack each AV6201A you received from the shipping container, and check the contents against the
packing list to ensure that all items are included. If any items are missing or damaged, contact your sales
representative or WardBeck Systems Ltd. directly.
Rear Module Options
There are two rear module options available for the AV6201A Analog Video distribution amplifier.
On the 20 slot
OG3FRC
frame the T6301A rear module occupies two slots and provides I/O for one
AV6201A card. For higher density applications, the T6401A occupies two slots and provides I/O for two
AV6201A cards. All connections are made on BNC type 75 Ohm connectors.
Figure 2. Rear Module Terminations
NOTE: The T6201A (obsolete) was designed for use exclusively with the 10 slot
DFR8310
frame and has
the same connection scheme as the T6301A.