Web Direct Estate Swing User manual - page 12
Programming User Access Phone umbers (cont):
Programming via phone call:
To program [Example number 2222222226 into position 03] in the list:
Press *5# (A short beep ~ success)
Continue press 603 (you should hear a short beep ~success)
Then you can input the phone number 2222222226# (A short beep ~ success)
And 2222222226 is programmed into position 03 in list 6
ote: If the last digit guest number entered was not match with the list number, the
number will not program successfully.
If the change has not been successful you will hear 3 beeps and must re-enter again.
Programming via Text Message (SMS)
Example:
To program phone number: 3333333331
Sends SMS command *BOOK#01#3333333331
Hence 33333333331 is listed in position 01 in List 1
Returned Message: BOOK(1>01;)= 3333333331
For phone number: 4444444441
Sends SMS command *BOOK#02#4444444441
Hence 4444444441 is listed in position 02 in List 1
Returned Message: BOOK(1>02;)= 4444444441
Deleting a number via Text Message (SMS) [can only be done through text]
Example:
To remove phone number: 6666666667
Simply sends a SMS Command *DEL>#6666666667 to the unit and it will search for number (6666666667) in the list and delete
it.
Returned Message:
Delete-OK
Guest:6>03;
Guest:6>03;
2222222226
Diagnostic display read out below