Webasto Air Top Evo 40 Installation Instructions Manual - page 7
7
Air Top Evo 40 | Air Top Evo 55
3.2 Installation location requirements:
The heater can be installed both on the exterior and interior.
Installation on exterior
The installation location must satisfy the following requirements:
■
There is sufficient space for the unit (see „3.3 Heater dimensi-
■
The installation location is protected from mechanical damage.
■
The installation location is protected from splash water and wa-
ter spray wherever possible.
■
The installation location is above the maximum permissible for-
ding level of the vehicle.
■
The combustion air inlet and exhaust gas outlet are separate (to
avoid exhaust crossover).
Installation on interior
The installation location must satisfy the following requirements:
■
There is sufficient space for the unit (see „3.3 Heater dimensi-
■
The connections for the combustion air system and the exhaust
system are completely on the outside.
■
The installation location is protected from mechanical damage.
■
Persons cannot come in contact with hot surfaces. Install con-
tact guard if necessary.
■
Heat-sensitive parts are protected from high temperatures. Ins-
tall heat shield if necessary.