Weda WP300 Instructions & Spare Parts Catalogue - Operation
12
OPERATION
PROCEDURES
1. Place the pump assembly (pump & discharge hose) in an
upright position.
Always ensure that the pump will be operating in an
upright position
2. Slowly lower pump into jobsite, using a rope, chain, or other
implements attached to the handle.
NEVER USE ELECTRICAL CABLE TO CARRY,
LIFT OR OTHERWISE MOVE PUMP.
This will damage the cable, which can cause
electrical shocks, shortage, pump failure, personal
injury and other accidents.
DO NOT DROP PUMP.
This will damage the pump and cause malfunctions
that can lead to personal and jobsite damage.
NEVER REST PUMP ON SOFT OR LOOSE BOTTOM.
Using the pump on a non-solid foundation can lead to
the pump sinking into mud or other substances that
WILL interfere with the performance of the pump. This
can lead to severe damage to the unit, which can result
in electrical shock, shortages and other hazards to
personal and jobsite safety.
To prevent the pump from operating on a non-solid
foundation, suspend pump with wire, rope or other
implements attached to handle. TAKE CARE TO
RESTRICT TWISTING ON WIRE, ROPE, OR
IMPLEMENT USED IN SUSPENDING PUMP DURING
START-UP.