Weda WP300 Instructions & Spare Parts Catalogue - Troubleshooting Guide
17
TROUBLESHOOTING GUIDE
ISSUE CAUSE
SOLUTION
1. Pump does not
start
1. Wrong Voltage
Check that pump is plugged into a
socket with the proper voltage.
2. No Power
Check that pump is plugged into a live
socket.
3. Damaged electrical
cable
DO NOT use pump.
Contact your dealer for further
instructions.
4. Bad fuse
Replace fuse.
5. Opened thermal
contactor
Check if motor is overheated. If that is
the case, unlock rotor or check electrical
connections.
6. Fauled impeller
Check if impeller is entangled. Make
sure impeller is clean and freely rotating.
2. Low capacity
or low head
1. Impeller is not
rotating smoothly
Check that the impeller runs
counterclockwise when plugged into
power sourse.
1. Tilt pump at slight angle on base.
2. Plug elecrical cord into power sourse
briefly to check that the pump rolls to
the right, or moves in a counter-
clockwise direction.
2. Clogged passages
1. Clean filter, impeller, pump housing,
broken pipes and/or clogged hoses.
2. Check if discharge hose is too long
or kinked. Change hose to proper
specifications and good working
condition.