Weewell WMA440 User Manual - Talk Back
15
when you use the Talk Back feature and when playing a lullaby.
Talk Back
You can use the Talk Back feature to comfort and reassure your
baby.
Whilst using Talk Back you will not be able to hear your baby
until you release the button.
1. Press and hold
on the Parent unit to speak to baby.
The display on the Parent unit shows Talk and the green link lights
on both Units flash.
2. Release
to hear your baby again.
Adjust Talk Back volume
The Baby unit has 5 volume levels.
1. During Talk Back, press
or
on the Baby unit to increase or
decrease the volume.
On the Parent unit, the volume can be switched off.
The display shows Volume Off.
Paging
You can use the button on the Baby unit to find the Parent
unit. This will also reset the speaker volume level, in case it has
been switched off.
1. Press
on the Baby unit. If the Parent unit volume was set
to off, this will automatically reset the volume to the default
volume. The paging alert will sound.
2. To stop the Page alert, press any button on the Parent unit, or
press
again on the Baby unit. If no button is pressed, the
paging tone will stop after 2 minutes.