Weewell WMA440 User Manual - Help

24

HELP

Helpline 

If you have any problems using your WMA440 Baby Monitor, 

please visit www.weewell.com 

Link light does not come on 

• Check that both the Baby and Parent units are switched on.

• If using batteries check that they are correctly installed and that

they are not drained. 

Link light is flashing green 

• If you have pressed   to use the Talk Back feature, the link light 

will flash to indicate one - way communication between the units. 

• The units are searching for a communication link.

• Check they are within range of one another and that the mains

power (or batteries) are properly connected.  

Link light is red 

• The link between your Units is broken. You will also hear an

alert to let you know there is no communication between the 

Units. If this happens, check that the mains power (or batteries) 

is correctly connected and that the Units are within range of one 

another. 

Parent unit remains silent or very quiet 

• The sensitivity setting may be too low, see page 19.

• You may have set the volume too low, see page 15.

You can hear a high pitched noise 

• The Units are too close to each other, or the volume setting is

too high. 

Talk back feature is not working 

• Check that the volume is loud enough at the Baby unit, see page

15.