Weewell WMA440 User Manual - 1. Press
19
Switch vibrate alert on or off
1. Press
scroll
to Vibrate. Press
.
2. The current available option will be displayed either Vibrate
off? or Vibrate on? Press
to select the option displayed.
3. Press
to return to standby.
If you set the sensitivity level too low,
only louder sounds in the baby’s room
will be picked up and communicated
back to you via the Parent unit. The
Unit will not pick up quieter
background noises.
The default sensitivity setting is Level
5–the microphone is permanently on.
Sound level visual indicator
The noise level from baby’s room is
indicated by the LEDS on the Parent
unit. So even if the loudspeaker is turned
down, you can be alerted visually.
There are7 LEDs noise indicators - 4
green and 3 red - covering a range of
noise levels from 0dB up to 40dB.
Alert tone and vibrating when the
loudspeaker is off
If the Parent unit loudspeaker is turned
off, and the noise level from baby’s
room reaches the 2nd red LED level, the
unit will beep and vibrate to alert you.
You can switch the sound and vibrate
alert settings on or off. The default
setting for both is on.
Lullaby
The Baby unit plays lullabies to gently soothe your baby back to
sleep. Each lullaby is played repeatedly for 15 minutes. Select
one of the five melodies orselect Play All for a medley of all 5
lullabies for 15 minutes.
You can also record your own lullaby or story lasting up to 2
minutes. To play your own recorded lullaby, select Own from the
menu list.
You can also plug in an external audio source like an MP3 or
CD player and play music or audiobooks of your own choice.
The auxiliaryportis on the back of the Baby unit.
Play lullaby
At the Baby unit:
1. Press
. The most recently selected lullaby will be displayed.
2. Press
to start playing.