Xenarc 700TSH Installation Manual - page 11
OSD ( On-Screen Display ) Menu
The Settings and options in the OSD menu are categorized into 6
Categories : Color, Adjust, OSD, Setup, Function, Sound
1. Colors
● Brightness : Adjust brightness by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of brightness.
Decrease the number for a lower level of brightness.
● Contrast : Adjust contrast by pressing Left ( ◄ ) or Right ( ► )
buttons. Increase the number for a higher level of contrast.
Decrease the number for a lower level of contrast.
● Sharpness : Adjust sharpness by pressing left or right buttons.
Press left to decrease sharpness and right to increase the level
of sharpness.
● Color Temp : Set the color temp to the desired setting : 6500K,
9300K and User.
● Backlight : Adjust backlight intensity by pressing Left ( ◄ ) or Right
( ► ) buttons. Increase the number for a higher level of backlight
output. Decrease the number for a lower level of backlight output.
Only works when Auto sensor is turned off.
11
│ Hardware Installation
2. Adjust
● Auto Config : Adjust display automatically.
● H Position : Adjust the Horizontal position by pressing the left or
right buttons.
● V Position : Adjust the Vertical position by pressing the left or
right buttons.
● Phase : Phase ( fine ) adjustment. Image flickering can be removed
through changing this setting (only valid for VGA setting )
● Clock : Adjust the horizontal sync width of the screen image.