Xeoos Twinfire Basic Operating And Installation Instructions - page 12
12
Operation
Door Handle Function
For continued operation, additional wood fuel should be added to the fire when the flames in the
upper combustion chamber have died down, but there are still enough hot embers available.
Open the door slowly to prevent the flames and ashes from falling out. When opening the
door the integrated door handle prevents the buildup of excessive smoke into the living
space. The first 45° of the movement of the handle will turn the stove into the heating up
mode. If you move the handle another 45° into the vertical position the door unlocks.
Door unlocked !
Heat up"
Handle functions:
Twinfire #
Again please open the stove door with caution - this enables a stable flow and avoids disruptive
turbulence in the fire chamber. After loading the wood, close the door, and when there is enough
flame, adjust the handle to the "Twinfire
®
" position.
Caution: Do not strike or slam the glass door when closing.
If the Twinfire
®
stove is operated continually at a high output rate in the position
of "heat up" the danger of overheating exists. The handle setting serves, as
the name states, exclusively for initial heating up the stove.
If the fire has burned down too far, put more fuel on the fire and leave the handle in the position
of "Heat up" until more of a flame develops. If the firebox and chimney are still warm, it normally
takes only a few minutes to restart.