1. DL manuals
  2. Xerox
  3. Copier
  4. 2006NPC - DocuColor Color Laser
  5. Manual

Xerox 2006NPC - DocuColor Color Laser Manual

Other manuals for 2006NPC - DocuColor Color Laser: Getting Started, User Manual, Manual, Maintenance Manual, Using Manual, Instructions
Manual is about: DocuColor 2006 User Guide

Summary of 2006NPC - DocuColor Color Laser

  • Page 1

    Xerox docucolor 2006 8–1 setting up the network server this chapter describes environments that typically include one or more novell netware and windows nt 4.0 network servers that share printing to the docucolor 2006. It describes setting up servers that use ipx/spx or tcp/ip protocols for communic...

  • Page 2

    8. Setting up the network server xerox docucolor 2006 8–2 printing on a netware 3.X, 4.X or 5.X network the netwise™ features built into the docucolor 2006 supports the following network operating environments: • netware 5.X—bindery and novell directory services (nds) • netware 4.X—novell directory ...

  • Page 3

    8. Setting up the network server xerox docucolor 2006 8–3 overview of ipx printing to the docucolor 2006 setting up the docucolor 2006 is similar to setting up any other postscript printer on the network. The following information is useful for experienced system administrators. The docucolor 2006 w...

  • Page 4

    8. Setting up the network server xerox docucolor 2006 8–4 you do not have to rerun setup when adding or removing a netware queue, but you should initialize these settings by powering the printer off and on after a queue is created or removed. When the docucolor 2006 is configured to connect to a net...

  • Page 5

    8. Setting up the network server xerox docucolor 2006 8–5 configuring nds connections on the nds file server in websetup at the client workstation in netadmin: create nds print queues create the nds printer and assign print queues create the print server and assign the printer configure users of the...

  • Page 6

    8. Setting up the network server xerox docucolor 2006 8–6 setting up an nds connection in nds, all netware entities (objects) are organized in a hierarchical tree structure. Objects have a name, properties, and a context that defines the location of the object in the directory tree. For the docucolo...

  • Page 7

    8. Setting up the network server xerox docucolor 2006 8–7 setting up a netware print queue for bindery for netware 3.X and for 4.X or 5.X in emulation mode, the netware print server and print queue for docucolor 2006 are created and configured from netware print console (pconsole), a utility that is...

  • Page 8: Windows Nt 4.0

    8. Setting up the network server xerox docucolor 2006 8–8 the docucolor 2006 on a tcp/ip network with windows nt 4.0 when a windows nt 4.0 workstation is configured to connect to the docucolor 2006 using tcp/ip, it can print directly to the printer. If the workstation shares the printer over the net...

  • Page 9

    8. Setting up the network server xerox docucolor 2006 8–9 configuring a windows nt 4.0 server use the following procedure to configure a windows nt 4.0 server to communicate with the docucolor 2006. Basic steps include: • load the tcp/ip network protocol and configure it with an ip address, subnet m...

  • Page 10

    8. Setting up the network server xerox docucolor 2006 8–10 the windows nt 4.0 hosts file provides compatibility with the unix hosts file. The file is used as a local domain name services (dns) equivalent. It has the same format as the /etc/hosts file on the unix servers: ip addresshostname#comments ...

  • Page 11

    8. Setting up the network server xerox docucolor 2006 8–11 if more than one docucolor 2006 printing connection (for example, print queue and hold queue) is published, you may want to create a printer for each print connection so that you and other users can print to each queue directly. Configuring ...

  • Page 12: Fiery Webtools

    8. Setting up the network server xerox docucolor 2006 8–12 configuring the server and client workstations for fiery webtools fiery webtools provide access to many printer functions via the internet or corporate intranet, providing additional flexibility in remote management. You can access the fiery...

  • Page 13

    8. Setting up the network server xerox docucolor 2006 8–13 accessing the fiery webtools 1. Start the internet browser. 2. Enter the ip address or dns name of the printer. 3. Press enter. The fiery home page is displayed. Select the name of a particular webtool to use. For more information, refer to ...

  • Page 14

    8. Setting up the network server xerox docucolor 2006 8–14 the printer on a network with unix workstations when a unix workstation is configured with the lpd protocol and connected to the printer over a tcp/ip network, it can print directly to the docucolor 2006. Setting up unix workstations require...

  • Page 15

    8. Setting up the network server xerox docucolor 2006 8–15 the docucolor 2006 has a printer controller that understands lpd protocols. The remote printer name (rp in the /etc/printcap file) must be used for successful communication and must be either print or hold. The remote printer name is also us...

  • Page 16

    8. Setting up the network server xerox docucolor 2006 8–16 setting up tcp/ip for communication with the printer 1. The superuser (root login) must add the printer to the ip host table of the network or other system database of network printers. 2. In the file or utility used by your network, specify...