- DL manuals
- Xerox
- Printer
- 8860MFP - Phaser Color Solid Ink
- System Administrator Manual
Xerox 8860MFP - Phaser Color Solid Ink System Administrator Manual
Summary of 8860MFP - Phaser Color Solid Ink
Page 1
Www.Xerox.Com/support office printers system guide administrator p h a s e r ® 8 8 6 0 m f p m u l t i f u n c t i o n p r i n t e r.
Page 2
Copyright © 2007 xerox corporation. All rights reserved. Unpublished rights reserved under the copyright laws of the united states. Contents of this publication may not be reproduced in any form without permission of xerox corporation. Copyright protection claimed includes all forms of matters of co...
Page 3
System administrator guide i contents 1 overview resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 printingscout alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4
Contents system administrator guide ii protocol control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 http. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5
Contents system administrator guide iii 5 printing features personal, secure, proof, shared saved, personal saved, and print with jobs . . . . . . . . . . . 5-2 smart trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2...
Page 6
Contents system administrator guide iv 8 glossary terms and abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 a configuration card parameters b printer commands c acknowledgements index.
Page 7: Resources
System administrator guide 1-1 this section includes: ■ resources on page 1-1 ■ printingscout alerts on page 1-2 ■ phasersmart technical support on page 1-2 ■ xerox support centre on page 1-4 ■ centreware internet services (is) on page 1-5 you can obtain information regarding your printer and its ca...
Page 8: Printingscout Alerts
Printingscout alerts system administrator guide 1-2 printingscout alerts printingscout is an automated tool that is installed with the xerox printer driver. It checks the printer status when a print job is sent. If the printer is unable to print a job, printingscout displays an alert on the user’s c...
Page 9
Phasersmart technical support system administrator guide 1-3 using centreware is to access phasersmart technical support from centreware is: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address field. 3. Click the support tab. 4. Select the phasersmart diagnostic t...
Page 10: Xerox Support Centre
Xerox support centre system administrator guide 1-4 xerox support centre the xerox support centre is a utility that is installed when running the driver installer. It is available for systems with windows 2000 and later or mac os x, version 10.2 and higher. The xerox support centre appears on the de...
Page 11
Centreware internet services (is) system administrator guide 1-5 centreware internet services (is) centreware is provides a simple interface to the embedded web server in any networked xerox printer that enables you to manage, configure, and monitor networked printers from your desktop. Centreware i...
Page 12: Network Installation
System administrator guide 2-1 this chapter includes: ■ using a startup network configuration file on page 2-2 ■ printer driver installation features on page 2-3 ■ discovery protocols on page 2-5 see also: advanced features guide at www.Xerox.Com/support network installation features.
Page 13: About The Configuration File
Using a startup network configuration file system administrator guide 2-2 using a startup network configuration file this section includes: ■ about the configuration file on page 2-2 ■ configuration file requirements on page 2-2 ■ specifying the location of the configuration file on page 2-2 about t...
Page 14: Walk-Up Printing Driver
Printer driver installation features system administrator guide 2-3 printer driver installation features this section includes: ■ walk-up printing driver on page 2-3 ■ walk-up installation on page 2-3 ■ installation from the printer’s hard drive or the web on page 2-4 ■ discovery protocols on page 2...
Page 15: Auto-Configuring Driver
Printer driver installation features system administrator guide 2-4 installation from the printer’s hard drive or the web you can install the printer driver from the printer’s hard drive. This is especially useful if you do not have the software and documentation cd-rom. Note: if the printer doesn’t...
Page 16: Discovery Protocols
Discovery protocols system administrator guide 2-5 discovery protocols this section includes: ■ ddns/wins on page 2-5 ■ dns (domain name services) on page 2-6 ■ service location protocol on page 2-6 ■ upnp (universal plug and play) on page 2-7 ddns/wins ddns/wins settings can be obtained from the bo...
Page 17: Dns (Domain Name Services)
Discovery protocols system administrator guide 2-6 dns (domain name services) dns settings reference servers by name and allow you to enter and view host names rather than ip addresses. Note: turning multicast dns on allows the printer to be automatically discovered on a tcp/ip network by apple maci...
Page 18
Discovery protocols system administrator guide 2-7 upnp (universal plug and play) upnp provides a simplified method to obtain an ip address for a printer, locate devices on the network, and display those devices on desktop computers. 1. Launch your web browser. 2. Enter your printer’s ip address in ...
Page 19: Network
System administrator guide 3-1 this chapter includes: ■ printer neighborhood on page 3-2 ■ job accounting on page 3-3 ■ usage profile reports on page 3-4 ■ xerox usage analysis tool on page 3-5 ■ protocol control on page 3-6 ■ cloning on page 3-14 network administration features.
Page 20: Printer Neighborhood
Printer neighborhood system administrator guide 3-2 printer neighborhood printer neighborhood is a tool in centreware is that enables you to search for printers on your network, check their status, and manage them remotely. You can also install, manage, and view printer usage information. Access to ...
Page 21: Job Accounting
Job accounting system administrator guide 3-3 job accounting the printer stores information about print jobs. This information is stored in a log file that lists job records. Each job record contains fields such as user name, job name, pages printed, job times, and toner or ink used. Not all fields ...
Page 22: Usage Profile Reports
Usage profile reports system administrator guide 3-4 usage profile reports usage profile reports provide information on many aspects of printer usage, such as ink or toner used, number of pages printed, and paper types used, gathered during the life of the printer. From this page you can view or pri...
Page 23: Xerox Usage Analysis Tool
Xerox usage analysis tool system administrator guide 3-5 xerox usage analysis tool the xerox usage analysis tool (uat) enables you to collect and analyze enterprise-wide xerox network printer usage data with customizable features: ■ cost analysis: track printing costs by groups of users or by groups...
Page 24: Protocol Control
Protocol control system administrator guide 3-6 protocol control this section includes: ■ http on page 3-6 ■ tcp/ip on page 3-7 ■ port 9100 on page 3-7 ■ lpr on page 3-8 ■ ipp (internet printing protocol) on page 3-8 ■ snmp (simple network management protocol) on page 3-9 ■ ftp (file transfer protoc...
Page 25: Tcp/ip
Protocol control system administrator guide 3-7 tcp/ip to change tcp/ip settings: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address field. 3. Click properties. 4. Select the protocols folder on the left navigation panel. 5. Select tcp/ip. 6. If prompted, enter y...
Page 26: Lpr
Protocol control system administrator guide 3-8 lpr lpr is an application-level printing protocol that uses tcp/ip to establish connections between printers and workstations on a network. To change lpr settings: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address ...
Page 27: Ftp (File Transfer Protocol)
Protocol control system administrator guide 3-9 snmp (simple network management protocol) snmp is a set of protocols designed to help manage complex networks. Snmp-compliant devices store data about themselves in mibs and return this data to the snmp requesters. The snmp configuration pages provide ...
Page 28
Protocol control system administrator guide 3-10 email server or smtp (simple mail transfer protocol) the email server settings page enables you to configure email server settings and to specify a return email address for undeliverable email. You can configure email server settings in centreware is ...
Page 29: Mailinx Remote Printing
Protocol control system administrator guide 3-11 mailinx remote printing mailinx remote printing provides the following key features: ■ the ability to send print jobs to a group of printers. ■ print services across firewalls and proxies. ■ status reporting using email messages. Mailinx remote printi...
Page 30: Mailinx Alerts
Protocol control system administrator guide 3-12 mailinx alerts about mailinx alerts mailinx alerts enable the printer to automatically send email to you and/or specified users when the following conditions occur: ■ the printer requires attention or when service is needed. ■ the printer displays an ...
Page 31: Ethertalk
Protocol control system administrator guide 3-13 ethertalk to change ethertalk settings: 1. Launch your web browser. 2. Enter the printer’s ip address in the browser’s address field. 3. Click properties. 4. Select the protocols folder on the left navigation panel. 5. Select ethertalk. 6. If prompted...
Page 32: Cloning
Cloning system administrator guide 3-14 cloning cloning enables you to configure one printer and then copy that configuration to another printer on the same network. You can access cloning using centreware is or centreware web. Using centreware is, you can select the settings you want to clone from ...
Page 33: Security Features
System administrator guide 4-1 this chapter includes: ■ basic concepts on page 4-2 ■ securing the printer in a high security environment on page 4-5 ■ managing certificates on page 4-6 ■ configuring ssl on page 4-7 ■ configuring administrator and key user settings on page 4-8 ■ configuring the print...
Page 34: Basic Concepts
Basic concepts system administrator guide 4-2 basic concepts this section includes: ■ about admin and key user accounts on page 4-2 ■ about http, https, and ssl/tls on page 4-3 ■ about certificates on page 4-3 ■ about access control lists on page 4-4 about admin and key user accounts admin and key u...
Page 35: About Certificates
Basic concepts system administrator guide 4-3 about http, https, and ssl/tls http (hyper text transfer protocol) is the protocol used to communicate across the internet between the printer web server and the web browser (clients). Because the data is transmitted in plain text and passwords are only ...
Page 36: About Access Control Lists
Basic concepts system administrator guide 4-4 if you want to use https, each printer must have a unique certificate that is accepted by each browser used to access the printer. This allows the printer web server to use https and encrypt data between the web browser and the printer. In addition, beca...
Page 37: Environment
Securing the printer in a high security environment system administrator guide 4-5 securing the printer in a high security environment if you are concerned about the security of your printer in a high security environment, such as a college or printing kiosk, you can configure settings in centreware...
Page 38: Managing Certificates
Managing certificates system administrator guide 4-6 managing certificates to modify a self-signed certificate so it is specific to your printer or to install a downloaded root-signed certificate on the printer: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address ...
Page 39: Configuring Ssl
Configuring ssl system administrator guide 4-7 configuring ssl once a certificate is set up, you can select when to use ssl to secure the connection between the printer and the server. Note: you can restrict user access to ssl pages in centreware is. For more information, see configuring administrat...
Page 40
Configuring administrator and key user settings system administrator guide 4-8 configuring administrator and key user settings to prevent unauthorized changes to printer settings: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address field. 3. Click properties. 4. S...
Page 41
Configuring the print host access list system administrator guide 4-9 configuring the print host access list to prevent unauthorized printing to your printer: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address field. 3. Click properties. 4. Select the security fo...
Page 42
Controlling access to color printing system administrator guide 4-10 controlling access to color printing note: color access controls are available on color printers only. To control the user’s access to color printing, you can require the use of a 4-digit numeric password to print in color. To requ...
Page 43: Securing The Hard Drive
Securing the hard drive system administrator guide 4-11 securing the hard drive this section includes: ■ selecting the hard drive overwrite security option on page 4-11 ■ selecting the automatic removal of secure, personal, and proof jobs option on page 4-12 selecting the hard drive overwrite securi...
Page 44: Proof Jobs Option
Securing the hard drive system administrator guide 4-12 using centreware is to select the hard drive overwrite security option: 1. Launch your web browser. 2. Enter the printer’s ip address in the browser’s address field. 3. Click properties. 4. Select the security folder on the left navigation pane...
Page 45
Securing the hard drive system administrator guide 4-13 a. Select overwrite removals , and then press the ok button to select on or off . Note: remove job files does not remove saved or protected print job files. 4. To remove all secure, personal, and proof print files every day at a set time: a. Se...
Page 46: 802.1X Configuration
802.1x configuration system administrator guide 4-14 802.1x configuration introduction to 802.1x and eap the 802.1x ieee standard defines port-based, authenticated network access control for ethernet local area networks (lans). With 802.1x, the user or device must pass network access control by succ...
Page 47
802.1x configuration system administrator guide 4-15 7. Install root certificate – if you select eap method(s) that require a root certificate, you can: ■ install a new root certificate. ■ use the already existing root certificate. ■ choose not to validate server. 8. Install device certificate – if ...
Page 48
Locking the control panel menus system administrator guide 4-16 locking the control panel menus to prevent others from changing settings in the printer setup menus, you can lock some of the control panel menus. This is useful when printers are located in public places, such as schools, libraries, an...
Page 49: Configuring Snmp
Configuring snmp system administrator guide 4-17 configuring snmp this section includes: ■ configuring snmp for maximum security on page 4-17 ■ configuring snmp v1/v2c on page 4-18 ■ configuring snmp v3 on page 4-20 ■ configuring the snmp access control list on page 4-22 ■ disabling snmp on page 4-2...
Page 50: Configuring Snmp V1/v2C
Configuring snmp system administrator guide 4-18 d. On the administrative security settings page, clear the view configuration web pages and modify configuration web pages check boxes for users who should not have access to these pages. 6. Set up the snmp administrative and key user accounts to conf...
Page 51
Configuring snmp system administrator guide 4-19 adding or editing traps for snmp v1/v2c to add or edit traps for snmp v1v2c: 1. On the snmp configuration page: click the configure snmp v1v2c button, and then click the configure traps button. The configure traps page lists the current trap destinati...
Page 52: Configuring Snmp V3
Configuring snmp system administrator guide 4-20 configuring snmp v3 when configuring snmp v3, you can set up: ■ administrative, key, any user, and driver accounts with privacy and authentication keys associated with each account. ■ snmp user read and write access. ■ an access control list that limi...
Page 53
Configuring snmp system administrator guide 4-21 the key user account settings ■ user name: the key user account name defined on the configure snmp v3: key user account page. ■ authentication protocol: the protocol associated with the authentication key selected on the configure snmp v3 key user acc...
Page 54
Configuring snmp system administrator guide 4-22 configuring the snmp access control list to set up a list of hosts that are authorized to access the printer using snmp: 1. Launch your web browser. 2. Enter your printer’s ip address in the browser’s address field. 3. Click properties. 4. Select the ...
Page 55: Disabling Snmp
Configuring snmp system administrator guide 4-23 disabling snmp if you are not using snmp, disable it to prevent unauthorized access through applications that use these protocols. If you disable snmp, the following driver features are also disabled: ■ printingscout alerts ■ walk-up printing installe...
Page 56: Printing Features
System administrator guide 5-1 . This chapter includes: ■ personal, secure, proof, shared saved, personal saved, and print with jobs on page 5-2 ■ smart trays on page 5-2 ■ jam recovery on page 5-3 printing features.
Page 57: Saved, and Print With Jobs
Personal, secure, proof, shared saved, personal saved, and print with jobs system administrator guide 5-2 personal, secure, proof, shared saved, personal saved, and print with jobs these features are available if your printer has an internal hard drive. These jobs are stored on the hard drive and re...
Page 58: Jam Recovery
Jam recovery system administrator guide 5-3 jam recovery note: jam recovery is not available on all printers, see the documentation that came with your printer for more information. The jam recovery settings enable you to select how the printer handles jobs that are in the process of printing when a...
Page 59: Fax Features
System administrator guide 6-1 . This chapter includes: ■ fax defaults on page 6-2 ■ fax individual directory help on page 6-5 ■ fax group directory help on page 6-7 ■ print fax reports help on page 6-9 ■ clear pending fax jobs help on page 6-9 ■ clear received fax jobs help on page 6-9 fax features.
Page 60: Fax Defaults
Fax defaults system administrator guide 6-2 fax defaults view, set, or change system default fax settings from the fax settings page. Making changes to system default settings through centreware is is the same as making the corresponding changes from the system’s control panel. When you are satisfie...
Page 61: Fax Send Setup
Fax defaults system administrator guide 6-3 starting rate: this setting specifies the initial fax transmission and reception rate. The default settings are 33.6 kbps (super g3) for the phaser 8860mfp printer. The following values are supported: ■ 4800 bps ■ 9600 bps ■ 14.4 kbps (g3) ■ 19.2 kbps ■ 28...
Page 62: Fax Receive Setup
Fax defaults system administrator guide 6-4 transmission header: this setting turns off or on including the line name in the transmission header. The default setting is on. Dial pause: this setting determines the duration of each pause when dialing to send a fax. Select the dial pause number of seco...
Page 63
Fax individual directory help system administrator guide 6-5 fax individual directory help the fax individual directory page lists all individual directories on the system. A maximum of 200 individual directories can be stored on the phaser 8860mfpprinter. Buttons and links on this page enable you t...
Page 64
Fax individual directory help system administrator guide 6-6 starting rate: select the initial fax transmission and reception rate from the drop-down list. The default setting is use system setting. Use system setting sets the starting rateto 33.6 kbps (super g3) for the phaser 8860mfp printer. The ...
Page 65: Fax Group Directory Help
Fax group directory help system administrator guide 6-7 fax group directory help the fax group directory page lists all group directories on the system. A maximum of 100 group directories can be stored on the phaser 8860mfp printer. Buttons and links on this page enable you to add, edit, or delete f...
Page 66: Editing Group Directory Help
Fax group directory help system administrator guide 6-8 adding new group members help select members to add to the fax group directory on the add new group members page. A fax group directory should contain at least one group member. A fax group directory on the phaser 8860mfp printer can contain a ...
Page 67: Print Fax Reports Help
Print fax reports help system administrator guide 6-9 the group members list is sorted by default by the individual or group directory numbers. Both individual and group directories display in the list. Click the column to sort the group members list by number (no.), name, phone number, or type (ind...
Page 68: Scanning Features
System administrator guide 7-1 . This chapter includes: ■ overview on page 7-2 ■ public folder help on page 7-2 ■ private folder help on page 7-3 ■ create folder help on page 7-4 ■ administrative general settings help on page 7-5 ■ administrative folder cleanup help on page 7-6 scanning features.
Page 69: Overview
Overview system administrator guide 7-2 overview the scanning procedure used with the phaser 8860mfp printer differs from that of desktop scanners. Because the system is normally connected to a network rather than directly to a single computer, you select a destination for the scanned image at the p...
Page 70: Retrieving Scans
Private folder help system administrator guide 7-3 retrieving scans to retrieve a scanned image from the system hard drive, select the desired file type from the drop-down list associated with that file, and then click the go button. You can retrieve up to 3 image files at a time. If you do not sele...
Page 71: Create Folder Help
Create folder help system administrator guide 7-4 create folder help to set up a private folder on the system, click the create folder icon from the navigation tree. Enter a unique folder name up to a maximum of 10 alphanumeric characters in length. If you enter a folder name that is already in use,...
Page 72: Private Folder Operations
Administrative general settings help system administrator guide 7-5 administrative general settings help you can perform a variety of maintenance functions from the administrative general settings page. Private folder operations you can perform various functions using the private folder operations p...
Page 73: Immediate Cleanup Options
Administrative folder cleanup help system administrator guide 7-6 administrative folder cleanup help at times you may need to perform immediate or scheduled system maintenance to purge old scanned documents or images. You have the option to set up schedules or to immediately delete files at any give...
Page 74: Terms and Abbreviations
System administrator guide 8-1 terms and abbreviations glossary terms and abbreviations definitions access control list a centreware is feature that enables you to limit access to devices. Admin account a centreware is feature that enables you to limit access to specific printer functions by specify...
Page 75
Terms and abbreviations system administrator guide 8-2 eap eap(extensible authentication protocol) is the standard authentication mechanism carried over 802.1x. The eap method is an inner authentication protocol that provides the secure mechanism for the authentication exchange. Ethertalk a type of ...
Page 76
Terms and abbreviations system administrator guide 8-3 mdns mdns (multicast dns) is a multicast-based discovery protocol that enables you to find your printer on an apple network or another device that uses multicast-based discovery. Mib mib (management information base) provides specific informatio...
Page 77
Terms and abbreviations system administrator guide 8-4 radius radius (remote authentication dial in user service) is a server used for remote user authentication and accounting. It can be used on any network that needs a centralized authentication and/or accounting service for its workstations. Slp ...
Page 78: Configuration Card
System administrator guide a-1 the printer has a configuration card that stores network parameters and configuration (n, dn, dx, etc.) data. The configuration card is hot swappable, enabling you to share or replace it, providing an alternative to on-site service. Network settings are saved on the co...
Page 79
System administrator guide a-2 general information parameters ■ printer name ■ startup page enabled ■ printer id ■ sys/start job ■ job timeout ■ load paper timeout ■ menu timeout ■ power saver timeout ■ intelligent ready ■ paper source ■ tray 1 or tray 1 (mpt) ■ tray 2 ■ tray 3 ■ tray 4 ■ tray 5 not...
Page 80
System administrator guide a-3 pcl parameters ■ font number ■ pitch ■ point size ■ symbol set ■ orientation ■ form length ■ line termination ■ color mode (on color printers) ■ wide a4 usb 2.0 parameters ■ language ■ wait timeout hard drive parameters the hard drive parameters are only stored on the ...
Page 81
System administrator guide a-4 802.1x ■ enabled ■ disabled ethertalk parameters ■ enabled ■ disabled ■ language ■ filtering ■ name ■ printer type ■ zone ■ network node tcp/ip parameters ■ enabled ■ disabled ■ host name ■ host name requested ■ ip address ■ network mask ■ router/gateway ■ dhcp/bootp ■...
Page 82
System administrator guide a-5 slp parameters ■ enabled ■ disabled ■ directory agent discovery enable ■ directory agent ■ scope 1 ■ scope 2 ■ scope 3 ■ slp multicast enable ■ slp multicast ttl ■ slp mtu ssdp parameter ■ enabled ■ disabled ■ ssdp ttl nbns (wins) parameters ■ node type ■ wins servers ...
Page 83
System administrator guide a-6 ipp (internet printing protocol) parameters ■ enabled ■ disabled ■ language ■ filtering ■ network path snmp parameters ■ snmp v1/v2c ■ snmp v3 ■ host access list centreware is (http) parameters ■ enabled ■ disabled ■ custom link ■ refresh delay ■ administrator password...
Page 84
System administrator guide a-7 mailinx remote printing parameters ■ language ■ filtering ■ pop3 server ■ pop3 user name ■ pop3 password ■ pop3 polling interval ■ printing password ■ authorized users.
Page 85: Printer Commands
System administrator guide b-1 printer control language (pcl) and printer job language (pjl) commands can be used to control print job settings and printer defaults. In addition to the standard pcl and pjl commands, the phaser printers support xerox-unique pcl and pjl commands. This appendix lists t...
Page 86
System administrator guide b-2 us folio (8.5 x 13 in.) &l10a legal (8.5 x 14 in.) &l3a index card (3.0 x 5.0 in) &l78a a7 envelope (5.25 x 7.25 in.) &l84a #10 commercial envelope (4.1 x 9.5 in.) &l81a monarch envelope (3.8 x 7.5 in.) &l80a c5 envelope (162 x 229 mm) &l91a dl envelope (110 x 220 mm) ...
Page 87
System administrator guide b-3 media type the following table lists the most common pcl commands for supported media types. For information on which media sizes are supported in your printer, and the trays that support them, print the paper tips page from your printer’s control panel. Media type pcl...
Page 88
System administrator guide b-4 input trays the following table lists the pcl commands for the input trays supported by the phaser 8860mfp multifunction printer. The table also lists the alternate tray used if the optional input tray is not installed. Note: when more than one command is listed, you c...
Page 89
System administrator guide b-5 phaser pjl commands the following table lists the most commonly used hp pjl and xerox-unique pjl commands. See also: hp printer job language technical reference for the standard set of pjl commands. Pjl command/parameter values description @pjl fsappend format:binary s...
Page 90
System administrator guide b-6 @pjl xjahostname=“hostname” roman-8 characters 1-255 sets the host name for job accounting. @pjl xjausername=“username” roman-8 characters 1-255 sets the user name for job accounting. @pjl xjobpassword=value 4-digit string (1-9) assigns the job password used by secure ...
Page 91
System administrator guide b-7 @pjl xpclpapersrcx = y x is 0, 1, 2, 3, 4, 5, 6, 7, 8, 20, 21, 22, 23, which is the number in the &l#h tray selection commands. Y is -1 for autoselect, 0 for the current tray (eject page), 1 for tray 1, 2 for tray 2, etc., and 99 for the factory defaults. Overrides the...
Page 92: Acknowledgements
System administrator guide c-1 original ssleay license copyright © 1995-1998 eric young (eay@cryptsoft.Com). All rights reserved. This package is an ssl implementation written by eric young (eay@cryptsoft.Com). The implementation was written so as to conform with netscape’s ssl. This library is free...
Page 93
System administrator guide c-2 this software is provided by eric young “as is” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author or contributors be liable f...
Page 94
System administrator guide c-3 part 2: networks associates technology, inc. Copyright notice (bsd) ----- copyright © 2001-2003, networks associates technology, inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the f...
Page 95
System administrator guide c-4 part 3: cambridge broadband ltd. Copyright notice (bsd) ----- copyright © 2001-2003, cambridge broadband ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are ...
Page 96
System administrator guide c-5 merchantability and fitness for a particular purpose are disclaimed. In no event shall the copyright holders or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of subs...
Page 97
System administrator guide c-6 vxworks this product may include software licensed to wind river by third parties. The following notices are provided to comply with the terms of such licenses. Wind river vxworks this product may include software developed by wide project and its contributors. Permiss...
Page 98
System administrator guide c-7 this product may include software copyright david a. Hinds. Use, redistribution, and modification of this code is permitted subject to the following conditions: 1. Redistribution of this code must preserve this copyright notice. 2. Binary distributions must include thi...
Page 99
System administrator guide c-8 the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, proc...
Page 100
System administrator guide c-9 not be used in advertising or publicity pertaining to distribution of the software or the documentation without specific, written prior permission. Intel corporation does not warrant, guarantee or make any representations regarding the use of, or the results of the use...
Page 101
System administrator guide c-10 distribute, sublicense, and/or sell copies of the software, and to permit persons to whom the software is furnished to do so, subject to the following conditions: the above copyright notice and this permission notice shall be included in all copies or substantial port...
Page 102
System administrator guide c-11 theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage. This product may include software copyright © 2003 ericsson r...
Page 103
System administrator guide c-12 (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage. This product contains software developed by the apache software foundation ( www.Apache.Org/ ). This product contains antlr softw...
Page 104
System administrator guide c-13 sniff+/sniff+ pro copyright © 1992–1997 compuware corporation copyright © 1984–1997 faircom corporation copyright © 1996–2000 greg stein and mark hammond copyright © 1999 the apache software foundation copyright © 2001 xperts software wind river usb host stack this pr...
Page 105
System administrator guide c-14 whether in an action of contract, tort or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software. This product may contain software that is based in part on the work of the independent jpeg group. Wind river ppp...
Page 106
System administrator guide c-15 data security, inc. Makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind. These notices must be retained i...
Page 107
System administrator guide c-16 other components of this product, including without limitation wind river workbench, tornado, vxworks, and wind river ppp, include software derived from the rsa data security, inc. Md5 message-digest algorithm, and copyright © rsa data security, inc. All rights reserv...
Page 108
System administrator guide c-17 redistribution of a standard unzipsfx binary (including sfxwiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal sfx banner has not been removed from the binary or disabled. 3. Altered versions--including...
Page 109
System administrator guide c-18 government use: if you are acquiring this software on behalf of the u.S. Government, the government shall have only "restricted rights" in the software and related documentation as defined in the federal acquisition regulations (fars) in clause 52.227.19 (c) (2). If y...
Page 110
System administrator guide c-19 3. You may otherwise modify your copy of this package in any way, provided that you insert a prominent notice in each changed file stating how and when you changed that file, and provided that you do at least one of the following: a. Place your modifications in the pu...
Page 111
System administrator guide c-20 8. Aggregation of this package with a commercial distribution is always permitted provided that the use of this package is embedded; that is, when no overt attempt is made to make this package's interfaces visible to the end user of the commercial distribution. Such u...
Page 112
System administrator guide c-21 we protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no ...
Page 113
System administrator guide c-22 terms and conditions for copying, distribution and modification 1. This license agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of ...
Page 114
System administrator guide c-23 (for example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, subsection 2d requires that any application-supplied function or table used by this function must be optional: if the a...
Page 115
System administrator guide c-24 when a “work that uses the library” uses material from a header file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be...
Page 116
System administrator guide c-25 for an executable, the required form of the “work that uses the library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normal...
Page 117
System administrator guide c-26 if any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce ...
Page 118
System administrator guide c-27 2. In no event unless required by applicable law or agreed to in writing will any copyright holder, or any other party who may modify and/or redistribute the library as permitted above, be liable to you for damages, including any general, special, incidental or conseq...
Page 119
System administrator guide c-28 openssl license openssl license copyright © 1998–2003 the openssl project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source ...
Page 120
System administrator guide c-29 gsoap public license version 1.3a the gsoap public license is derived from the mozilla public license (mpl1.1). The sections that were deleted from the original mpl1.1 text are 1.0.1, 2.1.(c),(d), 2.2.(c),(d), 8.2.(b), 10, and 11. Section 3.8 was added. The modified s...
Page 121
System administrator guide c-30 1.11. “source code” means the preferred form of the covered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code di...
Page 122
System administrator guide c-31 3. Distribution obligations 3.1. Application of license. The modifications which you create or to which you contribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only ...
Page 123
System administrator guide c-32 3.5. Required notices. You must duplicate the notice in exhibit a in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then you must include such notice in a location (such as a relevant direc...
Page 124
System administrator guide c-33 6. Versions of the license 6.1. New versions. Grantor may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a partic...
Page 125
System administrator guide c-34 the authors expressly disclaim any liability resulting from use of the software in any such on-line equipment in hazardous environments and accepts no liability in respect of any actions or claims based on the use of the software in any such online equipment in hazard...
Page 126
System administrator guide c-35 10. U.S. Government end users 11. Miscellaneous 12. Responsibility for claims as between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and y...
Page 127
System administrator guide c-36 exhibit b. “part of the software embedded in this product is gsoap software. Portions created by gsoap are copyright (c) 2001–2004 robert a. Van engelen, genivia inc. All rights reserved. The software in this product was in part provided by genivia inc and any express...
Page 128
System administrator guide index-1 index a about the configuration file, 2-2 access control lists, 4-4 definition, 8-1 specifying access to printer settings, 4-8 specifying printer access using snmp, 4-22 specifying printing access, 4-9 access to color printing, 4-10 accessing online manuals using c...
Page 129
Index system administrator guide index-2 certificates, 4-3 definition, 8-1 root-signed, 4-4 self-signed, 4-3 setting up, 4-6 changing email server settings, 3-10 ethertalk settings, 3-13 ftp settings, 3-9 hard drive overwrite security setting, 4-11 ipp settings, 3-8 lpr settings, 3-8 mdns settings, ...
Page 130
Index system administrator guide index-3 f fax clear pending fax jobs, 6-9 clear received fax jobs, 6-9 configuration, 6-2 defaults, 6-2 group directory help, 6-7 group information, 6-8 group members, 6-8 individual directory help, 6-5 print reports, 6-9 receive setup, 6-4 send setup, 6-3 finding pr...
Page 131
Index system administrator guide index-4 locking the control panel menus, 4-16 log file job accounting, 3-3 lpr, 3-8 definition, 8-2 m mailinx alerts, 3-12 definition, 8-2 remote printing, 3-11 definition, 8-2 setting up, 3-11 managing printers remotely, 3-2 mdns, 2-5 definition, 8-3 mib definition,...
Page 132
Index system administrator guide index-5 protocols controlling, 3-6 definition, 8-3 discovery, 2-5 email server, 3-10 ethertalk, 3-13 ftp, 3-9 http, 3-6 ipp, 3-8 lpr, 3-8 mailinx alerts, 3-12 mailinx remote printing, 3-11 mdns, 2-5 port 9100, 3-7 securing, 3-6 slp, 2-6 snmp, 3-9 tcp/ip, 3-7 public f...
Page 133
Index system administrator guide index-6 tls, 4-3 definition, 8-4 troubleshooting online support assistant, 1-1 phasersmart technical support, 1-1, 1-2 printingscout alerts, 1-2 print-quality problems using centreware is, 1-5 technical support, 1-1 u udp definition, 8-4 usage analysis tool, 3-5 defi...