Xerox 8860MFP - Phaser Color Solid Ink User Manual

environmental benefits

Solid Ink

Bring 

green

 into your 

office scheme

with the Xerox 

Phaser

®

 8860MFP 

and Phaser

®

 8860 printer

The Xerox solid ink imaging process is 

the most environmentally friendly way 

to put an image on paper. From its nearly 

waste-free printing process to its safe, 

toxin-free solid ink sticks, it was made with

the earth in mind.

Leaves no trace behind.

Consider this — solid ink images are printed onto a rotating drum and offset onto paper in just one 

pass of the print engine. This Xerox-exclusive imaging process results in nearly 100% ink-to-page 

transfer efficiency during normal printing.

In comparison, conventional laser / LED printers’ toner-to-page transfer efficiency is much less, 

resulting in residual toner and developer accumulation that requires the device to purge the excess 

material to a waste collection container after every print. 

The bottom line? 

Solid ink printing generates 

90% less waste 

during use than a typical color laser product.

Safe and clean.

Resin-based solid ink sticks are completely safe and clean, and contain no

solvents. Unlike toners, they cannot spill, leak or smudge on your clothes.

Recycle ready.

You’ll be happy to know that you can recycle solid ink printouts 

just like the output from laser printers or office copiers. 

And because solid ink prints the same vivid color on any paper, 

you can use recycled paper for all your printing. You don’t need 

expensive, super-white paper to get superb image quality.

Phaser 8860MFP

multifunction system

Phaser 8860