Xerox Color 1000 System Administration Manual - page 38
It is recommended that you do not enter any numbers on this screen before consulting
with your Xerox Service Representative. Entering numbers on this screen may change
system settings which may result in a service call to restore the system to the correct
settings.
Related Topics:
Using the NVM Read/Write feature
Using the NVM Read/Write feature
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the System tab.
4. Select the NVM Read/Write button.
The NVM Read/Write window opens.
5. Enter the desired, six-digit Chain Link Number.
a) Using the numbers on the keyboard, enter the Chain Number.
b) Press the Tab button on the keyboard to advance to the Link field.
c) Enter the Link number.
d) Select the Next button.
The Enter the New Value window displays.
6. Using the keyboard, enter the New Value to switch on a feature.
7. Select the Apply button.
The NVM Read/Write window displays the entered value as the Current Value.
8. Select Close to save and close your new setting.
9. Select OK to close the System Settings window.
10. Select Logoff to exit the Administrator mode.
11. Run your print job.
Important
After running your print job, switch off the NVM feature; this will ensure that the
machine runs at maximum efficiency and will prevent paper jams.
Related Topics:
Logging on as Administrator
Power Saver
Use this feature to set the time that lapses until the machine and system PC UI enter a
reduced power consumption mode. The timers are activated when all print jobs have
been completed and there are no jobs in the job queue.
The Power Saver feature consists of the following options:
• Enter Power Saver
-
System PC & Print Engine
Xerox
®
Color 800i/1000i Presses Xerox
®
Color 800/1000 Presses
5-10
System Administration Guide
System Settings