Xerox Color 1000 System Administration Manual - page 51
6
Profiles
This feature allows you to create and customize profiles/procedures for Alignment. The
Alignment feature allows you to position the output image in order to accommodate
for misalignment or skew. These profiles are used at the point of need for specialized
print jobs.
If optional accessories are attached to the machine, additional profiles are available,
such as Fold Adjustment and/or Finishing Devices. These are discussed in more detail
later in this section.
Note
The Profiles features can only be accessed from the Administrator mode.
Related Topics:
Alignment
Fold Adjustment
Enter/exit the Profiles
Enter/exit the Profiles
1. Logon as Administrator.
2. Select the Profiles button.
The Profiles window opens.
The Finishing tab displays only if your machine has a third-party DFA device attached.
3. To create an Alignment profile, select the Alignment tab.
4. To create a Fold Adjustment profile, select the Fold Adjustment tab.
5. Select Close to exit Profiles and return to the main UI.
Related Topics:
Logging on as Administrator
6-1
Xerox
®
Color 800i/1000i Presses Xerox
®
Color 800/1000 Presses
System Administration Guide