Xerox CX User Manual - page 110
Parameter
Option
Description
Paper stock
The following options are available:
●
Use Paper Stock: Select the desired paper stock. If you
select Undefined, you can set the desired parameters in
the Paper size, Media type, and Media weight lists.
●
Paper size: The paper size that you want to use. For
custom paper sizes, you need to specify the required
width and height.
Note: The units of measurement (mm or inches) are
selected in the Localization tab in the Preferences
window.
●
Mixed paper size: Select check box if the job contains
different paper sizes.
Note: This option enables you to print jobs that contain
different paper sizes and orientation.
Interleaves
Interleaves: Select Add Interleaf and then select the size
and stock that you want to use.
Gallop
Enables you to start printing a long job, usually VDP, while
the job is still processing. The following options are available:
●
Print after: Gallop enables you to begin printing a
defined number of pages while the job is still processing.
●
Pages: The number of pages that you want the system
to process before printing starts.
Layout
Page Orientation
The orientation for the trim size in which your job prints.
Select Portrait or Landscape.
Note: When set, it changes the trim orientation in the
Imposition tab, in the Size area.
Scaling
The following options are available:
●
Manual: Increases or decreases the image size
according to the percentage that you enter.
❐ Do not affect imposition marks: When you select
this option the page is scaled but the imposition
marks stay in the same location.
●
Fit to output sheet size: Fits the image to the selected
paper size.
Note: You can also use the Fit to output sheet size
option to scale the layout for imposed jobs.
102
Chapter 10—Job parameters