Xerox CX User Manual - page 59
linked to the relevant media type in the Media and Color Manager
window.
Importing a destination profile
If you saved a profile in a location other than the Profile Manager,
you must first import it before you can print a job using it.
Note: After you import the profile the file becomes *.icm format.
1. From the Tools menu, select Resource Center.
The Resource Center window appears.
2. In the Resource list, select Profile Manager.
3. Click the Destination Profile tab.
4. Click the Import (+) button.
5. In the Destination profile area, click the Browse button.
6. Click Import and browse to the location of the required
destination profile, and then click Open.
The new destination file is displayed in the Destination Name
box; if you would like to change the name you may do so.
7. Click Import.
The new destination profile is added to the Color Flows tab in
the job parameters window.
Importing a source profile
Source profiles are used to emulate other devices, or color
spaces. You can import source CMYK or RGB profiles.
1. From the Tools menu, select Resource Center.
The Resource Center window appears.
2. In the Resource list, select Profile Manager.
Importing a destination profile
51