Xerox CX User Manual - page 63
●
Calibration tables created in the Calibration Wizard.
●
None: This is a default option and cannot be edited. Jobs that
have this option selected are processed and printed without
using a calibration table.
●
Normal (default table): This is a default table and cannot be
edited. If a calibration table has not been created for the media
type, Normal weight, and screening method that you are using,
the Normal calibration table is used when you process and print
your job.
Info Data
Output Density
Measured: The values that are measure from the printed
target.
Target: The expected values of the output density.
Minimum Accepted: The minimum measured value of the
output density that is accepted for correction.
Properties
The parameters that were selected when the calibration
table was created.
Managing calibration tables
55