Xerox CX User Manual - page 85
3. Import your business card file to the ProcessPrint virtual printer.
The file is imported to the Process queue with a Waiting status.
4. In the suspended Process queue, double-click the business
card file.
The Job Parameters window appears.
5. In the Job Parameters window, under Print, select the Paper
Stock parameter.
6. In the Paper size list, select 11 x 17.
7. Click the Imposition tab.
8. In the Imposition Method list, select Step & Repeat.
9. Select the Size parameter, and set the values as follows:
a. For Trim Size, select Custom
b. For H, type
1.96
inches or
50
mm
c. For W, type
3.54
inches or
90
mm
A preview of the layout is displayed below.
10. For Trim orientation, make sure that the Landscape option
is selected. To change the trim orientation, in the Job
Parameters window, select Print and then select Layout.
Select the desired orientation.
11. Select the Templates parameter, and set the values as follows:
a. In the Layout list, select Best Fit. The CX print server
determines how many business cards can fit on each sheet.
The CX print server calculates the best fit.
b. For Print Method, make sure Simplex is selected, since
your business cards are one-sided.
Print using imposition
77