Xerox DocuCentre SC2020 User Manual - page 151
Xerox
®
DocuCentre
®
SC2020
User Guide
148
8
This chapter describes how to print using the print driver.
Major Print Driver Functions
This section describes the major print driver functions used for printing. The print driver must be installed
before use.
Notes:
•
For information on how to install the print driver, refer to
Installing the Print Driver/Scan
•
For information on the Print functions, click [Help] in the print driver screen to display the
Help Information.
•
There are some functions that adding the mounted component information to the print
driver from the [Properties] screen under the [Options] tab is required to make the functions
available. Any functions not displayed on the screen are not available.
•
For information on how to set the option information, refer to
•
Multiple-Up
: Prints a multiple-page document on a single page.
•
2-Sided Print
: Prints on both sides of each page.
•
Poster
: Enlarges one page of print data to the specified size and prints it on multiple pages. Used to
create a large poster.
•
Booklet
: 2-Sided printing combined with page collation to enable the creation of booklets with the
correct page sequence.
•
Watermark
: Prints 'Confidential' or another preset character string on top of print data.
•
Mixed Document
: Prints documents containing both vertical and horizontal pages, or pages of
different sizes.
Printing
This section describes how to print document.
The procedure used to print will vary according to the application you are using. See your application's
manual for the specific procedure.