Xerox DocuCentre SC2020 User Manual - page 32
of
322
Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
29
4.
Press the power switch to the [ | ] position to turn the power ON.
Using the Ethernet Interface
The device supports 100BASE-TX and 10BASE-T Ethernet interfaces.
To connect the Ethernet interface:
1.
Press the power switch to the [ ] position to turn the power OFF.
Note:
Ensure that the display is turned off.
2.
Connect a network cable to the Ethernet port.
Note:
Prepare a network cable suitable for your network connection. When you replace the network
cable, contact our Customer Support Center.