1. DL manuals
  2. Xerox
  3. Printer
  4. DocuColor 3535
  5. Installation Manual

Xerox DocuColor 3535 Installation Manual

Summary of DocuColor 3535

  • Page 1

    Fiery network controller for docucolor 3535 user software installation guide.

  • Page 2

    This manual is part of a set of fiery network controller for docucolor 3535 ™ documentation that includes the following manuals for users and system administrators: • the quick start guide summarizes the steps for configuring the fiery network controller for docucolor 3535 and printing. It also desc...

  • Page 3

    Copyright © 2003 electronics for imaging, inc. All rights reserved. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from electronics for imaging, ...

  • Page 4

    Fcc information warning: fcc regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Class a compliance this equipment has been tested and found to comply with the limits ...

  • Page 5

    Confidentiality you agree to hold the software in confidence, disclosing the software only to authorized users having a need to use the software as permitted by this agreement and to take all reasonable precautions to prevent disclosure to other parties. Remedies and termination unauthorized use, co...

  • Page 7: Contents

    Contents about the documentation introduction about this manual xi specifications xii user software xiii fiery webtools xv system requirements xv chapter 1: installing user software on a windows computer setting up postscript printing with windows 9x/me 1-1 installing the postscript printer driver f...

  • Page 8

    Viii contents using fiery utilities for the first time 1-53 configuring the connection for fiery utilities 1-53 configuring the connection for command workstation 1-55 installing color files from the user software cd 1-59 installing the icm profiles on a windows computer 1-60 loading the monitor set...

  • Page 9

    Ix contents chapter 4: troubleshooting on a windows computer 4-1 setting up printing on windows nt 4.0 or windows 2000/xp computers 4-1 reinstalling the adobe postscript printer driver on windows 9x/me 4-1 problems with the fiery utilities on windows computers 4-1 on a mac os computer 4-2 setting up...

  • Page 11

    Xi about this manual this manual describes how to install user software for the fiery network controller for docucolor 3535, and how to set up printing from microsoft windows and apple mac os computers. For information about setting up network servers and clients to use the fiery network controller ...

  • Page 12

    Xii introduction specifications • intel pentium iii, 850 mhz cpu • 256mb ram • 20gb hard disk drive • supports appletalk, tcp/ip, and ipx/spx protocols simultaneously • supports port 9100 • supports twisted pair (fast ethernet 100basetx or ethernet 10baset) • supports adobe postscript 3 • includes 1...

  • Page 13

    Xiii user software user software fiery user software is provided on the user software cd. Adobe and microsoft postscript printer drivers enables you to print to the fiery from windows 9x/me, windows nt 4.0, and mac os computers; also supports fiery and postscript 3 features. Windows 2000/xp users sh...

  • Page 14

    Xiv introduction n ote : you can install postscript printer drivers and printer description files from the user software cd or from the fiery with the installer webtool. For instructions, see “using the fiery webtools installer” on page 3-2. Colorwise pro tools icc-open color management and calibrat...

  • Page 15

    Xv fiery webtools fiery webtools fiery webtools allow you to manage your fiery remotely from the internet or from your company’s intranet. You access fiery webtools from the fiery webtools home page. N ote : to find out which fiery webtools are supported, see “specifications” on page xii. System req...

  • Page 17

    1 1-1 setting up postscript printing with windows 9x/me this chapter describes the procedures for installing software and setting up printing from a computer using a supported version of windows. For the windows versions supported, see the quick start guide . The general steps for installing the sof...

  • Page 18

    1 1-2 installing user software on a windows computer installing the postscript printer driver for windows 9x/me the following procedure describes installing the printer driver from the user software cd or from the installer webtool. Subsequent procedures describe configuring installable options and ...

  • Page 19

    1 1-3 setting up postscript printing with windows 9x/me 8. Select the fiery printer driver appropriate for your printer and click next. 9. Select the lpt1 port and click next. You will configure the port later, according to your network type. 10. Enter a name for the fiery. 11. To make the fiery the...

  • Page 20

    1 1-4 installing user software on a windows computer t o configure options manually for w indows 9 x /m e 1. Click start, choose settings, and then choose printers. 2. Click the fiery icon and choose properties from the file menu. 3. Click the accessories tab. 4. Select an installed option from the ...

  • Page 21

    1 1-5 setting up postscript printing with windows 9x/me configuring installed options and updating print options settings automatically if you have a tcp/ip-enabled network, you can automatically update your printer driver to reflect the options currently installed on the copier. When the printer dr...

  • Page 22

    1 1-6 installing user software on a windows computer 5. Select two-way communication. 6. Type the fiery ip address or dns name. 7. To display the printer’s current default settings when opened, select update fiery driver when opened. 8. Click update, and then click ok..

  • Page 23

    1 1-7 setting up postscript printing with windows 9x/me completing the windows 9x/me printer connection to print from windows 9x/me, you must: • set up network servers, if any. • set up the fiery to accept print jobs from your computer. • configure a port on each windows 9x/me computer for the netwo...

  • Page 24

    1 1-8 installing user software on a windows computer t o select a frame type for ipx/spx printing for w indows 9 x /m e 1. Click start, choose settings, and then choose control panel. 2. Double-click the network icon. Make sure that ipx/spx-compatible protocol is listed in the installed network comp...

  • Page 25

    1 1-9 setting up postscript printing with windows 9x/me 6. In the value menu, choose the frame type that corresponds to the one set in fiery network setup. If necessary, print the configuration page from the fiery control panel to determine which frame type(s) are configured. N ote : do not select a...

  • Page 26

    1 1-10 installing user software on a windows computer 3. Click the details tab and click add port. A list of connection options appears. 4. In the add port dialog box, specify the network path or click browse for a display of your network environment. 5. If you are using a netware file server, doubl...

  • Page 27

    1 1-11 setting up postscript printing with windows 9x/me b efore you begin • configure the fiery for smb printing from the websetup in websetup>network setup>service 2>enable windows print services. Smb printing is referred to as windows printing in setup, on the configuration page. T o set up smb p...

  • Page 28

    1 1-12 installing user software on a windows computer 5. Select yes to install the postscript printer driver and printer description file for the selected connection. The add printer wizard dialog box appears. 6. Specify whether you print from ms-dos based programs and click next. If you choose yes,...

  • Page 29

    1 1-13 setting up postscript printing with windows 9x/me 11. Select the fiery printer driver appropriate for your printer and click next. 12. Type a name for the fiery in the printer name field and choose whether to make it the default printer. Click next. 13. If you want to print a test page, choos...

  • Page 30

    1 1-14 installing user software on a windows computer b efore you begin 1. Prepare the fiery for tcp/ip printing. 2. Make sure the fiery is configured for ipp printing. For more information, see the configuration guide . 3. Specify the printing destination on your computer. T o set up ipp printing w...

  • Page 31

    1 1-15 setting up postscript printing with windows nt 4.0 t o install the p ost s cript printer driver for w indows nt 4.0 1. Click start, choose settings, and then choose printers. 2. Double-click add printer. 3. To install a printer locally, select my computer and click next. My computer is availa...

  • Page 32

    1 1-16 installing user software on a windows computer if you are installing from files you downloaded using the installer webtool, browse to the prntdrvr\prntdrvr\ps_drvr\win_nt4x folder and click open. Make sure “oemsetup.Inf ” or “oemsetup” is selected. The path is copied to the install from disk ...

  • Page 33

    1 1-17 setting up postscript printing with windows nt 4.0 11. Indicate whether you want the printer installed as a shared printer, and click next. If you select shared, enter a share name for the printer and select the operating systems used by client computers. For information on shared printers, s...

  • Page 34

    1 1-18 installing user software on a windows computer 3. Click the device settings tab and scroll to installable options. 4. Select an installable option and choose a setting. N ote : windows nt systems display installable options as a menu. You must select the installable option to activate the men...

  • Page 35

    1 1-19 setting up postscript printing with windows nt 4.0 the two-way communication feature also updates expert color settings options to reflect the current color settings on the fiery. To access expert color settings options, click the expert settings tab in the colorwise print option bar of the f...

  • Page 36

    1 1-20 installing user software on a windows computer completing the windows nt 4.0 printer connection to print from windows nt 4.0, you must: • set up network servers, if any. • set up the fiery to accept print jobs from your computer. • configure a port on each windows nt 4.0 computer for the netw...

  • Page 37

    1 1-21 setting up postscript printing with windows nt 4.0 t o set up tcp/ip and lpr printing for w indows nt 4.0 1. Open the properties dialog box for the fiery and click the ports tab. 2. Click add port. The available port types are displayed. 3. Select lpr port and click new port. If the lpr port ...

  • Page 38

    1 1-22 installing user software on a windows computer 6. Click ok. The computer checks the address or dns name you entered and notifies you if it cannot resolve the address. 7. Click close in the printer ports dialog box. The new port configuration is reflected in the ports tab. You must close the p...

  • Page 39

    1 1-23 setting up postscript printing with windows nt 4.0 t o set up ipx (n ovell ) printing for w indows nt 4.0 1. Double-click network neighborhood. 2. Double-click netware or compatible network. A list of netware servers appears. 3. Double-click the netware tree or file server on which the networ...

  • Page 40

    1 1-24 installing user software on a windows computer 8. Choose properties from the file menu and click the ports tab. Verify that the connection to the netware queue is listed and selected as a port for the fiery. 9. Click the general tab and click print test page. 10. In the printer job notes wind...

  • Page 41

    1 1-25 setting up postscript printing with windows nt 4.0 setting up smb printing on windows nt 4.0 smb printing (also known as windows printing) allows you to install the postscript printer driver and printer description files, and print from your computer to a particular print connection (hold, pr...

  • Page 42

    1 1-26 installing user software on a windows computer t o set up smb printing on w indows nt 4.0 1. Double-click network neighborhood. 2. Browse for the printer you want to print to. The printer name you are browsing for is the name entered in webtools >websetup > network setup>service setup>windows...

  • Page 43

    1 1-27 setting up postscript printing with windows nt 4.0 3. Double-click the name of the fiery to display enabled print connections. 4. Double-click the name of the connection you want to print to. The printers dialog box appears, asking whether you want to set up the printer. 5. Select yes to comp...

  • Page 44

    1 1-28 installing user software on a windows computer 9. If you are installing from the cd, browse to the english\prntdrvr\ps_drvr\win_nt4x folder and click open. If you are installing from files you downloaded using the installer webtool, browse to the prntdrvr\prntdrvr\ps_drvr\win_nt4x folder and ...

  • Page 45

    1 1-29 setting up postscript printing with windows 2000/xp t o install the p ost s cript printer driver for w indows 2000/xp 1. On windows 2000, click start, choose settings, and then choose printers to display the printers window. On windows xp, click start and choose printer and faxes. 2. On windo...

  • Page 46

    1 1-30 installing user software on a windows computer 5. In the dialog box displaying lists of manufacturers and printers, click have disk. The install from disk dialog box prompts you for the disk. 6. If you are installing from the user software cd, insert it into the cd-rom drive. 7. Type the name...

  • Page 47

    1 1-31 setting up postscript printing with windows 2000/xp 10. Type a name for the fiery in the printer name field. This name will be used in the printers window and the queues window. 11. Follow the instructions in the remaining dialog boxes. When asked whether to print a test page, select no. The ...

  • Page 48

    1 1-32 installing user software on a windows computer n ote : the digital signature not found dialog box indicates that the printer driver for windows 2000 does not have a microsoft digital signature. However, printing to the fiery is processed correctly, so click yes to continue with installation. ...

  • Page 49

    1 1-33 setting up postscript printing with windows 2000/xp t o configure installable options on the f iery from the p ost s cript printer driver for w indows 2000/xp 1. On windows 2000, click start, choose settings, and then choose printers. On windows xp, click start, and choose printers and faxes....

  • Page 50

    1 1-34 installing user software on a windows computer configuring installed options and updating print options settings automatically if you have a tcp/ip-enabled network, you can automatically update your printer driver to reflect the options currently installed on the fiery. When the printer drive...

  • Page 51

    1 1-35 setting up postscript printing with windows 2000/xp completing the windows 2000/xp printer connection to print from windows 2000/xp, you must: • set up network servers, if any. • set up the fiery to accept print jobs from your computer. • configure a port on each windows 2000/xp computer for ...

  • Page 52

    1 1-36 installing user software on a windows computer before you continue, contact the system administrator for the ip address assigned to the fiery, as well as the subnet mask and the gateway address, if they are used. The tcp/ip protocol should already be installed on the windows 2000/xp workstati...

  • Page 53

    1 1-37 setting up postscript printing with windows 2000/xp 6. Click next. 7. Make sure that generic network card is selected as standard for device type and click next. 8. Click finish to close the add standard tcp/ip printer port wizard dialog box and click close in the printer ports dialog box. 9....

  • Page 54

    1 1-38 installing user software on a windows computer 12. Enter the name of the print connection. For lpr, enter print, hold , or direct in the queue name field. For port 9100, you can manually enter the following port numbers for each print connection under raw settings: direct: 9101 print: 9102 ho...

  • Page 55

    1 1-39 setting up postscript printing with windows 2000/xp t o set up ipx (n ovell ) printing for w indows 2000/xp 1. On windows 2000, double-click my network places. On windows xp, click start, and then click my network places. 2. Double-click netware or compatible network. A list of netware server...

  • Page 56

    1 1-40 installing user software on a windows computer 8. Choose properties from the file menu and click the ports tab. Verify that the connection to the netware queue is listed and selected as a port for the fiery. 9. Click the general tab and click print test page. 10. In the printer job notes fiel...

  • Page 57

    1 1-41 setting up postscript printing with windows 2000/xp setting up smb printing on windows 2000/xp smb printing (also known as windows printing) allows you to install the printer driver and associated files, and print from your computer to a particular print connection (hold, print, or direct) on...

  • Page 58

    1 1-42 installing user software on a windows computer n ote : you can also locate the printer using the search feature on your windows computer. Right-click my network places and click search for computers. Type the name of the printer and click search now. If you are not able to locate your fiery, ...

  • Page 59

    1 1-43 setting up postscript printing with windows 2000/xp 12. Verify the path is correct in the install from disk dialog box and click ok. 13. Type a name for the printer in the printer name field. 14. Follow the on-screen instructions to complete the installation. For more information, see “to ins...

  • Page 60

    1 1-44 installing user software on a windows computer 3. Select network printer and click next. 4. Select “connect to a printer on the internet or on your intranet.” type an ip address or computer name in the url field. The url for the printer is the ip address or dns name followed by “ipp” and the ...

  • Page 61

    1 1-45 installing fiery mail port installing fiery mail port the e-mail service provides a method to print and control the fiery remotely. Jobs are sent to the fiery in the form of e-mail attachments. You can set up e-mail printing on windows computers by adding the fiery mail port software as a pri...

  • Page 62

    1 1-46 installing user software on a windows computer 4. Click add port. 5. Click other and select fiery mail from the list of ports. 6. Click ok. 7. Enter the basic information required to set up the e-mail port. Fiery’s e-mail address —enter the e-mail address of the fiery. Outgoing mail server —e...

  • Page 63

    1 1-47 installing fiery mail port 8. Click advanced. The e-mail port configuration dialog box appears. 9. Enter the following information. For fiery server: e-mail address —the e-mail address of the fiery. Queue —the print connection ( print, hold, or direct) on the fiery that you want. For outgoing...

  • Page 64

    1 1-48 installing user software on a windows computer 10. Click ok. The name assigned to the fiery mail port appears in the details tab of the fiery printer driver. 11. Click apply, and then click ok. The connection for the fiery mail port has now been configured. T o configure the connection for th...

  • Page 65

    1 1-49 installing fiery mail port 5. Select fiery mail and click new port. The add port dialog box appears. 6. Enter the basic information required to set up the e-mail port. Fiery’s e-mail address —enter the e-mail address of the fiery. Outgoing mail server —enter the name or ip address of the smtp...

  • Page 66

    1 1-50 installing user software on a windows computer 8. Enter the following information: for fiery server: e-mail address —the e-mail address of the fiery. Queue —the print connection on the fiery that you want. For outgoing mail server (smtp): server name —the smtp server to use. From address —the...

  • Page 67

    1 1-51 installing fiery utilities • fiery mail port (see “installing fiery mail port” on page 1-45) • command workstation • docbuilder pro (available as an option) n ote : do not attempt to install docbuilder pro from the user software cd (by starting the setup.Exe from the dbpro folder); it is auto...

  • Page 68

    1 1-52 installing user software on a windows computer n ote : before installing the twain fiery scan or fiery remote scan module, make sure the twain plug-ins (installed with twain-compliant application software) are located in the correct plugins subfolder. If the twain plug-ins have been deleted, ...

  • Page 69

    1 1-53 using fiery utilities for the first time using fiery utilities for the first time before you can use the newly installed software, you must configure the connection to the fiery. Configuration of the fiery utilities is similar. Configuring the connection for fiery utilities the first time you...

  • Page 70

    1 1-54 installing user software on a windows computer n ote : the nickname cannot contain any of the following seven characters: [ ] _ " ' protocol —choose the type of network protocol you are using from the menu. N ote : fiery utilities are not supported over ipx/spx. Command workstation is support...

  • Page 71

    1 1-55 using fiery utilities for the first time t o modify the configuration 1. To edit information for a fiery in the list of available servers, select the fiery by its nickname and click modify. 2. Make the necessary changes in the modify server settings dialog box and click ok. 3. To add a new fi...

  • Page 72

    1 1-56 installing user software on a windows computer 3. If no fiery servers were found, click the manual tab to search by dns name or ip address. Click add to add the server to the available servers list. 4. Click the auto search tab and then click advanced to search by either a range of ip address...

  • Page 73

    1 1-57 using fiery utilities for the first time 6. Select the fiery server you want to use and click add. The selected fiery server appears in the login server dialog box. 7. Click the server name. The log in dialog box appears. 8. Select administrator, operator, or guest and click log in. Your comp...

  • Page 74

    1 1-58 installing user software on a windows computer modifying the configuration edit the configuration whenever there is any change to your fiery server or network, such as a server name or ip address. If you change fiery setup information, do so before reconfiguring the connection. T o modify the...

  • Page 75

    1 1-59 installing color files from the user software cd installing color files from the user software cd you can copy additional color files from the user software cd to your hard disk. Many of the files are postscript files that you can download and print using fiery downloader. Icm folder icm moni...

  • Page 76

    1 1-60 installing user software on a windows computer installing the icm profiles on a windows computer the icm profiles included in the icm folder on the user software cd are for use with colorwise pro tools. You can also use the icm profiles with applications that support icc standards, such as ad...

  • Page 77

    1 1-61 installing color files from the user software cd t o load the rgb w orking s pace profile for p hotoshop 5. X 1. Start photoshop. 2. Choose color settings from the file menu and choose rgb setup from the color settings submenu. 3. In the rgb setup dialog box, click load. 4. For windows 9x/me,...

  • Page 78

    1 1-62 installing user software on a windows computer loading the icm copier device profile this icm profile defines the target color space for printing to the copier. These instructions assume you have installed the icm profiles included on the user software cd. For more information, see “installin...

  • Page 79

    1 1-63 installing color files from the user software cd t o load the monitor settings file and icm device profile in p hotoshop 7. X /6. X 1. Start photoshop. 2. Choose color settings from the edit menu and select advanced mode in the color settings dialog box. 3. Choose efi rgb from the rgb menu. 4...

  • Page 80

    1 1-64 installing user software on a windows computer 2. Copy the printer description file for your fiery to the appropriate location. If you use copy this file to this location pagemaker 5.0 or later ef3x3322.Ppd for pagemaker 5.0, \aldus\usenglsh\ppd4 for pagemaker 6.0, \pm6\rsrc\usenglsh\ppd4 for...

  • Page 81

    2 2-1 setting up the fiery as a postscript printer the general steps for installing the fiery user software and setting up printing on a mac os computer are as follows: • install the postscript printer driver and printer description file. • set up the fiery in the chooser. • install the fiery utilit...

  • Page 82

    2 2-2 installing user software on a mac os computer setting up mac os 9 printer drivers and printer description files the following instructions are for mac os 9 and mac os x classic mode. T o install the a dobe ps printer driver and printer description file for m ac os 9 1. Quit all open applicatio...

  • Page 83

    2 2-3 setting up the fiery as a postscript printer 3. Click the adobeps icon. The fiery appears in the select a postscript printer list in the form of _. N ote : only the print connections (direct, hold, and print) that have been enabled in setup appear in the chooser. 4. Select a fiery connection f...

  • Page 84

    2 2-4 installing user software on a mac os computer paper deck option —not installed, 3 tray module, tandem tray finisher option —not installed, finisher 7. Click ok to close options for the printer. 8. Close the chooser. Setting up mac os x printer drivers and printer description files the followin...

  • Page 85

    2 2-5 setting up the fiery as a postscript printer setting up the fiery in the print center after you install the printer description files, you must set up the fiery in the print center in order to take full advantage of its features. This section describes how to set up the fiery and configure ins...

  • Page 86

    2 2-6 installing user software on a mac os computer 5. For ip printing, choose ip printing, and enter the ip address or dns name for the fiery in the printer’s address field. 6. For printer model, select the appropriate manufacturer name, and then select the file for the fiery ppd. 7. Click add. T o...

  • Page 87

    2 2-7 setting up the fiery as a postscript printer 2. Click add in the printer list dialog box. 3. Choose appletalk or ip printing in the pop-up menu. 4. For appletalk, choose the appletalk zone, and then choose the name of the fiery. If the zone is not listed as the default zone, or one of the rece...

  • Page 88

    2 2-8 installing user software on a mac os computer 6. For printer model, select other. 7. In the choose a file dialog box, select the appropriate language file from the left- hand column, and the fiery name from the right-hand column. The following table explains which file name corresponds to your...

  • Page 89

    2 2-9 setting up the fiery as a postscript printer 8. Click choose. 9. Click add in the printer list window. For more information about adding printers, see your mac os x documentation. T o configure installable options 1. Start print center by clicking the print center icon. Alternatively, you can ...

  • Page 90

    2 2-10 installing user software on a mac os computer 5. In the printer info dialog box, choose the appropriate settings. Paper deck option —not installed, 3 tray module, tandem tray finisher option —not installed, finisher 6. Click apply changes. Installing fiery software and fonts the mac os instal...

  • Page 91

    2 2-11 installing fiery software and fonts • fiery remote scan—supported twain-compliant application software plug-ins folder • fiery scan—supported twain-compliant application software plug-ins folder the installer also creates a folder named twain in your system folder:preferences folder, and inst...

  • Page 92

    2 2-12 installing user software on a mac os computer to install m ac os r untime for j ava 1. Open the mrj folder on the user software cd and double-click installer. 2. Read the apple computer inc. License agreement and click agree to install the software. 3. Click install. Some files are installed....

  • Page 93

    2 2-13 installing fiery software and fonts b efore you begin • print the configuration page from the control panel and note the ip address of the fiery. T o configure a connection for c olor w ise p ro t ools 1. Start the utility by double-clicking its icon. The choose printer device dialog box appe...

  • Page 94

    2 2-14 installing user software on a mac os computer n ote : the nickname cannot contain any of the following seven characters: [ ] _ " ' protocol —tcp/ip is the only supported network protocol, so no selection is necessary. Server name —enter the ip address (or dns or hosts name) of the fiery. New ...

  • Page 95

    2 2-15 installing fiery software and fonts t o modify the configuration 1. To edit information for a fiery in the list of available servers, select the fiery by its nickname and click modify. Edit information in the modify server settings dialog box as necessary, and click ok. 2. To add a new fiery ...

  • Page 96

    2 2-16 installing user software on a mac os computer 5. When you have entered all the information, click add. 6. With the device name selected, click ok. The fiery appears in a list of configured servers. 7. Click ok in the configure dialog box. The fiery appears in a list of available servers. 8. W...

  • Page 97

    2 2-17 installing fiery software and fonts modifying the configuration edit the configuration whenever there is any change to your fiery or network, such as an ip address or device change. Change the specific fiery setup information before configuring the connection. T o modify the configuration 1. ...

  • Page 98

    2 2-18 installing user software on a mac os computer t o specify a f iery connection 1. Double-click the fiery downloader icon. 2. Select the appletalk zone in which the fiery is located from the appletalk zones list. The available servers appear in the servers list. 3. Select the fiery in the serve...

  • Page 99

    2 2-19 installing color files from the user software cd fonts the fonts installer on the user software cd includes screen and printer fonts that correspond to the 136 built-in postscript printer fonts on the fiery. The font installer copies both types of fonts to the system folder:fonts folder on yo...

  • Page 100

    2 2-20 installing user software on a mac os computer color files folder (inside the english folder) cmyk color reference.Ps, an 11-page, letter-size postscript file to use for reference when defining cmyk colors in applications. Pantone book.Ps, a 19-page, letter-size postscript file that indicates ...

  • Page 101

    2 2-21 installing color files from the user software cd loading icc profiles the icc profiles installed are used with colorwise pro tools and applications that support icc standards. These instructions assume that you have already installed the icc profiles included on the user software cd inside th...

  • Page 102

    2 2-22 installing user software on a mac os computer 3. Close the colorsync dialog box. For more information about icc profiles, see your photoshop documentation. Loading the monitor settings file the efirgb icc monitor settings file can be used in photoshop or other applications that support icc pr...

  • Page 103

    2 2-23 installing color files from the user software cd loading the icc copier profile the icc copier profile enables rgb-to-cmyk conversions that are specific to the kind of copier you are using. T o load the icc copier profile in p hotoshop 5. X 1. Start photoshop. 2. Choose color settings from th...

  • Page 105

    3 3-1 setting up fiery webtools fiery webtools allow you to manage your fiery remotely from the internet or from your company’s intranet. The fiery has its own home page, from which you can select a variety of functions. For more information on using fiery webtools, see the printing guide . Setting ...

  • Page 106

    3 3-2 downloading installers with fiery webtools using the fiery webtools installer the installer webtool allows you to download installers for printer drivers and user software directly from the fiery to your computer. T o download printer driver user software files with the i nstaller w eb t ool 1...

  • Page 107

    3 3-3 using the fiery webtools installer 6. For installation of printer drivers, continue with the following instructions. A dialog box appears, prompting you to save the file to the location you choose. For windows computers, a dialog box appears, offering you the choice of running the program acro...

  • Page 109

    4 4-1 on a windows computer this chapter provides troubleshooting tips. On a windows computer setting up printing on windows nt 4.0 or windows 2000/xp computers for information about problems you may encounter using the postscript printer driver for windows nt 4.0/2000/xp, see the adobe readme file ...

  • Page 110

    4 4-2 troubleshooting on a mac os computer setting up the fiery in the chooser if auto-setup does not work and you are prompted to select the printer description file, select the appropriate fiery file in your system folder :extensions:printer descriptions folder, “xerox docucolor 3535 ps.” installi...

  • Page 111: Index

    Index a adobe acrobat for docbuilder pro 1-52 installation 1-52 adobe pagemaker for windows see pagemaker for windows adobe postscript printer driver, see postscript printer driver appletalk connecting to mac os 2-2, 2-5 c calibrat folder, for windows users 1-59 calibration folder, for macintosh use...

  • Page 112

    I-2 index fiery utilities configuring the connection on windows 1-53 to 1-55 installing for mac os 2-10 installing for windows 1-50 problems on windows 4-1 fiery webtools installer 3-2 to 3-3 setting up 3-1 fonts installer for mac os 2-19 installing 2-19, 4-2 printer fonts 2-19 screen fonts 2-19 fon...

  • Page 113

    I-3 index installing software 2-11 troubleshooting 4-2 monitor settings file, mac os 2-22 n netware client setup windows 9x/me 1-10 windows 2000/xp 1-38 windows nt 1-22 o oemsetup.Inf file 1-2, 1-12, 1-16, 1-28, 1-30 p pagemaker for windows 1-64 pantone book.Ps 2-20 pantone.Ps 1-59 photoshop 5.0 loa...

  • Page 114

    I-4 index stand21.Ps (mac os) 2-20 stand21.Ps (windows) 1-59 stand34.Ps (mac os) 2-20 stand34.Ps (windows) 1-59 t troubleshooting mac os computers 4-2 windows computers 4-1 u uninstalled fonts folder 4-2 user software cd contents (mac os) 2-1 contents (windows) 1-50 installing from, for mac os 2-2, ...