Xerox DocuMate 3115 User Manual - page 102
DocuMate 3115
User’s Guide
89
3.
Click the
Properties
button.
•
Turn on AutoLaunch™ for front-feed scanning
—Select this option to have the scanner
automatically start scanning when an item is inserted in the front of the scanner.
•
Paper pickup delay
—If the AutoLaunch option is enabled, the Paper pickup delay option
also becomes available. The Paper pickup delay is the amount of time you want the scanner
to wait until it feeds the item into the scanner to start scanning.
To set the Paper pickup delay, click the drop-down arrow and choose from the list of 5
options. The settings are in milliseconds, so 1250 ms is 1.25 seconds.
•
Exit front-fed paper through the back
—When selected, front-fed pages will exit from the
back of the scanner. When unselected, front-fed paper will exit from the front of the scanner.
•
Calibrate
—Click the Calibrate button to start the scanner calibration wizard. The scanner
self-calibrates when you click the Calibrate button. The calibration window on-screen will
close automatically when calibration is finished. If it doesn’t close automatically, click the
Finish button.
4.
Click OK to save the changes and close the dialog box.