Xerox DocuMate 3115 User Manual - page 62
DocuMate 3115
User’s Guide
49
Editing or Deleting Scan Configurations
Editing and deleting is normally for the configurations you create, not for your scanner’s pre-set
configurations.
NOTE:
Your scanner comes with a number of configurations pre-set at the factory. To ensure that your
scanner will always have a set of correct scan configurations, do not delete the pre-set configurations.
We also recommend that you keep those configurations locked so they are not inadvertently deleted.
That way, you will always have the factory-settings available. If you do delete or edit them, and want
to get the factory pre-sets back again, you will need to uninstall then re-install your scanner.
To edit or delete a scan configuration:
1.
Open the One Touch Properties window.
2.
Select the scan configuration you want to edit or delete.
•
To delete the configuration, click the
Delete
button.
•
To edit the configuration, click the
Edit
button.
Edit the settings and click
OK
.
3.
Click
OK
to close the One Touch Properties window.
Select the scan
configuration to
edit or delete. It
must be unlocked,
as indicated by
not having a lock
displayed here.