Xerox DocuMate 3115 User Manual - page 52
DocuMate 3115
User’s Guide
39
Configuring the One Touch Buttons
When you installed the scanner, the software configured each One Touch button with appropriate
settings consisting of: a
Destination Application
, a
Scan Configuration
, and a
File Format
.
1.
Click on the One Touch icon.
2.
Right-click a button on the One Touch Button Panel.
3.
The One Touch Properties window opens.
The One Touch Properties window will also open when you press, hold down for 3 seconds, and release
the Simplex or Duplex button.
Changing a Button setting
1.
Click on an application name in the
Select Destination
list.
2.
Select a file format in the
Select Format
panel.
3.
Select a scanning configuration in the
Select Configuration
list.
4.
Click on
OK
to save the changes.
5.
Place a page in the scanner.
6.
Click on the button that you made the changes for.
7.
The scanner starts scanning and sends the image to the application, with the file format and
scanning configuration you specified.
NOTE:
The next section contains detailed information on making changes to the One Touch Properties
window.
NOTE:
Some of the options on the One Touch Properties Window are “grayed out” and are not
available, these options are not appropriate for your scanner model.
Right-click on a button (for example, button
1) and the Properties window opens for that
button.
One Touch Icon