Xerox DocuMate 3115 User Manual - page 99
DocuMate 3115
User’s Guide
86
3.
Click the VRS Settings tab to see the new VRS settings.
4.
Choose the Kofax VRS options for the scan configuration.
5.
Click the drop-down arrow to choose the type of VRS settings to use for the new scan
configuration. The options are:
•
Do not use VRS processing
—Scanning will not use the VRS processing.
•
Default settings
—Automatically selects the options your scanner can use with any scan
mode (Black&White, Grayscale, and Color).
The Basic Features are:
•
AutoCrop
—Determines the size of the item being scanned and produces an image of the
same size. For example, if you scan a postcard-sized document, the resulting image will be the
size of the postcard. This option overrides the page size setting.
•
AutoDeskew
—Detects the edges of a document and determines if they are straight or
skewed. If the page is skewed, the image will be adjusted so it is straightened. However, if the
page is fed through the scanner at too great an angle, the image may not straighten
correctly. In that case, re-scan the page using the paper guides to feed the paper in straight.
•
AutoBrightness
—Sets the brightness to achieve the best balance between the document’s
background, foreground, and highlighted areas. For grayscale images, lighter areas become
whiter and darker areas become blacker. AutoBrightness is not available for Color scan
configurations.
•
Edge Cleanup
—Sometimes a scan image will have a thin black outline around its edges. This
VRS option replaces those black outlines with white. Edge Cleanup only applies if AutoCrop
and AutoDeskew are selected so the software can determine where the edges are located.
Therefore, selecting Edge Cleanup will also select AutoCrop and AutoDeskew. Edge Cleanup is
only available for Black&White scan configurations.
•
DeSpeckle
—Speckles are small spots on an image that the scanner interpreted as a valid
part of the document. For example, an irregularity in the paper, or a small wrinkle, or the
holes where a staple was removed may show up as speckles on the scanned image. The
DeSpeckle option identifies these spots and removes them. DeSpeckle is only available for
Black&White scan configurations.
If you upgrade your scanner’s VRS software to the VRS Professional version, the Professional
Features shown at the bottom of the window become active.