Xerox DocuMate 4830 User Manual - page 162

Xerox

®

 DocuMate

®

 4830

User’s Guide

162

Disabled Options in this Section

Some options in the interface may be grayed out and cannot be selected. Grayed out options are either not 

appropriate for the current scanner, the software needed to enable the feature is not installed, 

or

 the feature is 

dependent on another setting in the scanner's interface. Hover the mouse cursor over a grayed out feature to see 

information about why the feature is unavailable.

When you are using a scanner that has multiple sources, such as an ADF with Flatbed combination scanner, some 

options may be disabled based on the current source displayed in the source list. For example when the flatbed 

source is selected, the manual feed option will be disabled.  

If an option is unavailable, check to see which source is displayed at the top of the source list when in the Advanced 

interface view.

Note that even when 

Sources identical

 is selected, any options that are only available for a specific source will be 

discarded if the scanner scans from the source that does not have those options.

When Flatbed is displayed here, only the 

options that can be used for the flatbed will 

be available in the scanner interface.

Click on one of the color modes under the 

source you want to configure.  That source 

will now be displayed at the top of the list, 

and the options for that source will be 

available in the scanner interface.