Xerox DocuMate 510 Operator's Manual - page 35
OFF-LINE SETUP MENU
XEROX WIDE FORMAT 510dp OPERATOR MANUAL
25
• The display will indicate " SYNERGIX CS 510dp IDLE" or
"SYNERGIX PS 510dp"
Viewing the recent fault log
Note: If there is a Scanner connected, the message displayed will
be SYNERGIX CS 510dp. If there is no Scanner connected the
message will be SYNERGIX PS 510dp.
To view the recent fault:
1. Access
the
PRINTER MENU. See "Accessing the Printer
Menu" in this chapter.
2. Press
the
Previous or Next key until DIAGNOSTICS is
displayed.
3. Press
the
Enter key to select DIAGNOSTICS.
4. Press
the
Previous or Next key until RECENT FAULT LOG is
displayed.
5. Press
the
Enter key to select RECENT FAULT LOG.
6. Press
the
Next key to display the two most recent faults.
7. Press
the
Previous or Next key to scroll through the fault
listing.
8. When you are finished viewing the fault listing, press the On-
line/Off-line key to return to on-line mode.
• The on-line/off-line indicator will light.
• The display will indicate " SYNERGIX CS 510dp IDLE" or
"SYNERGIX PS 510dp"
Displaying the billing meter counts
Note: If there is a Scanner connected, the message displayed will
be SYNERGIX CS 510dp. If there is no Scanner connected the
message will be SYNERGIX PS 510dp.
To display the billing meter counts:
1. Access
the
PRINTER MENU. See "Accessing the Printer
Menu" in this chapter.
2. Press
the
Previous or Next key until BILLING METERS is
displayed.
3. Press
the
Enter key to select BILLING METERS. The value
for METER A is displayed. METER A provides the square
footage of prints produced.
4. To view the value for METER B, press the Previous or Next
key. METER B provides the linear feet of media produced.
5. When you are finished viewing the meter counts, press the
On-line/Off-line key to return to on-line mode.
• The on-line/off-line indicator will light.
• The display will indicate " SYNERGIX CS 510dp IDLE" or
"SYNERGIX PS 510dp"