Xerox Docuprint 75 Getting Started - Information
XEROX DOCUMENT SERVICES PLATFORM SERIES
2-1
GETTING STARTED
2. DocuSP 3.6.x software release
information
The following information supports the DocuSP 3.6.x software.
Please read the information thoroughly before using the system.
Notes and caveats
The following sections cover known notes and caveats for the
DocuSP 3.6.x software and supporting applications.
DocuSP Controller
The following table details the notes and caveats for the DocuSP
3.6.x software and indicates which printer products, or all, to
which the caveat is applicable.
Caveat
Applicable printer product
When using the Socket Gateway to submit
LCDS jobs, the jobs may contain missing
pages or data, extra pages or data, the job
may abort, or a C03-308 error may occur.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
The Accounting Report for an LCDS On-line
job contains “Host Job Number = None” on
the middle reports for a multiple report job.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
In the LCDS Resource Manager, when an
IMG file is sampled and the Positioning
window is open, the IMG file does not print
correctly if the units are millimeters, 600 dpi,
or 300 dpi. Ensure that the units are set to
inches.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If a custom paper size is programmed in the
Queue Manager to be Short Edge feed, LCDS
jobs raise a message “Edge marking values
are out of range”. If necessary, program the
custom paper size as a Long Edge Feed.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If an LCDS job is waiting with an OTEXT
WAIT command, the fault clearance window
to resume printing does not display. The
operator has to resume the job.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS