Version 1.8 2/4/99 1 xerox docuprint n24/n32/n40 instructions for controller software upgrades.
Version 1.8 2/4/99 2 table of contents printer controller software upgrades .................................................................................................2 before you upgrade .............................................................................................................
Version 1.8 2/4/99 3 printer controller software upgrades: the printer controller is flash rom equipped. This means as software fixes and upgrades are available, you are able to update printer software without generating a service call. The following options are available for software updates: optio...
Version 1.8 2/4/99 4 before you upgrade: be sure the printer is in communication with the workstation or pc via parallel port or over the network. If the token ring option is installed on your printer, be sure to disconnect the cable to the token ring card prior to downloading the controller softwar...
Version 1.8 2/4/99 5 upgrade methods: select a method from the chart to do an upgrade for your operating system. The bold letter indicates the upgrade procedure to use. Operating system centreware dp lpr parallel port novell netware macintosh printer utility centreware internet services win 3.X a **...
Version 1.8 2/4/99 6 determining a successful upgrade: if your upgrade is successful, the control panel display will show “download passed… please reboot” for a few seconds and then will automatically reboot unless you upgraded the printer via the parallel port while pressing the button 1 and button...
Version 1.8 2/4/99 7 upgrade procedures: procedure a upgrade from centreware dp warning: once the upgrade process has begun do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you upgra...
Version 1.8 2/4/99 8 procedure b lpr upgrade procedure warning: once the upgrade process has begun do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you upgrade. 2. Send the upgrade f...
Version 1.8 2/4/99 9 procedure c the parallel port warning: once the upgrade process has begun, do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you upgrade. 2. If your xerox docupri...
Version 1.8 2/4/99 10 5. Power "off" then "on" the xerox docuprint n24/n32/n40 laser printer. The user interface should display "ready". 6. To confirm upgrade is successful, refer to the section labeled determining a successful upgrade. If you have problems: • make sure you are using an ieee 1284 co...
Version 1.8 2/4/99 11 procedure d upgrade via novell netware queue warning: once the upgrade process has begun do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you upgrade 2. Submit ...
Version 1.8 2/4/99 12 procedure e macintosh – xerox printer utility warning: once the upgrade process has begun do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you upgrade. 2. Launc...
Version 1.8 2/4/99 13 procedure f upgrade procedure via centreware internet services warning: once the upgrade process has begun, do not power off your printer! 1. Print a configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled before you...
Version 1.8 2/4/99 14 general troubleshooting some of the individual printer upgrade methods will have their own trouble shooting sections. This section is to address general problems. Printer contoller upgrade: if the printer controller upgrade has failed, you will not receive an error page. Check ...
Version 1.8 2/4/99 15.
