Xerox Phaser 5335 User Manual - page 113
5.2 Setting the Common Menus
95
Setting Item
Description
Control Panel
Sets whether or not to generate an audio tone when the correct button is
pressed on the control panel.
• [On] (default)
• [Off]
Invalid Key
Sets whether or not to generate an audio tone when the wrong button is
pressed on the control panel, or when an operation is attempted during an
error.
• [On] (default)
• [Off]
Machine Ready
Sets whether or not to generate an audio tone to inform you that the printer is
ready to print (such as right after powering on).
• [On] (default)
• [Off]
Job Complete
Sets whether or not to generate an audio tone when a job finishes successfully.
• [On] (default)
• [Off]
Fault Tone
Sets whether or not to generate an audio tone when a job finishes abnormally.
• [On] (default)
• [Off]
Alert Tone
Sets whether or not to generate an audio tone when a fault (such as a paper
jam) occurs and a job is held in a fault state.
• [On] (default)
• [Off]
Out of Paper
Sets whether or not to generate an audio tone when the printer runs out of
paper and a job is held in a fault state.
• [On] (default)
• [Off]
Low Toner Alert
Sets whether or not to generate an audio tone when the print cartridge needs
to be replaced.
• [On] (default)
• [Off]
Base Tone
Sets whether or not to generate an audio tone when a button, which toggles
between different options when pressed repeatedly, is pressed.
• [Off] (default)
• [On]