Xerox Phaser 5335 User Manual - page 27
1.3 Setting the Network Environment
9
To Set the Subnet Mask/Gateway Address
16. Press the button until [Subnet Mask] is displayed.
17. Press the button to accept the selection.
The current subnet mask is displayed.
18. Enter the subnet mask in the same way you entered the IP address, and press the
19. Press the button to return to [Subnet Mask].
20. Press the button to display [Gateway Address].
21. Press the button to accept the selection.
The current gateway address is displayed.
22. Enter the gateway address in the same way you entered the IP address, and press
the
23. The setting is now complete.
Reboot the printer by switching the power off and then on again.
24. Print the [Printer Settings] list to verify your settings.
TCP/IP
Subnet Mask
Subnet Mask
000.000.000.000*
Subnet Mask
255.255.255.000*
TCP/IP
Subnet Mask
TCP/IP
Gateway Address
Gateway Address
000.000.000.000*
Gateway Address
192.168.001.254*