Xerox Phaser 5335 User Manual - Cleaning The Rib Plate

7.9 Cleaning the Printer

169

Cleaning the Rib Plate

Clean the rib plate when output is faded vertically in paper feed direction, white streaks 

appear on output, or the outline of black area or text is blurred.

1. Switch the power off by pressing the power 

switch located on the front lower right of the 

printer to the position.

2. Unplug the power cord from the power 

outlet and the printer.

3. Pull the front cover release levers ("A") on 

both sides of the printer towards you and 

open the front cover.

4. Open the top cover.

5. Hold the print cartridge by the handles as 

shown in the figure, and remove the 

cartridge from the printer.

Note

• When removing the print cartridge, slide it towards 

you.

Important

• Be careful not to dirty your hands or clothes with toner. 

If toner gets on your hands or clothes, wash it off 

immediately.

Note

• After removing the print cartridge, do not place the 

cartridge upright or upside down. Avoid placing the 

cartridge in direct sunlight or in dusty places. Place the 

cartridge on a flat surface.