Xerox Wide Format 6604 User Manual - page 135
The Machine Info screen displays. .
3. Select the Administration tab.
4. Select Control Panel.
5. Select Configure timers...
The Set Timeout Durations Screen displays.
6. Select Low Power Timeout.
The Set Timeout Duration Low Power Timeout screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
Sleep Timeout
The procedure for setting up the Sleep mode is as follows. The setting range is 5 to 240
minutes. The factory default setting for Sleep mode is 55 minutes.
1. Press the Services button on the Control Panel.
The Services menu screen displays.
2. Select Machine Info.
The Machine Info screen displays.
3. Select the Administration tab.
4. Select Control Panel.
5. Select Configure timers....
The Set Timeout Durations screen displays.
6. Select Sleep Timeout.
The Sleep Timeout Duration Sleep Timeout screen displays.
7. Using either the scroll buttons or the numeric keypad, select the desired setting, and
then select Save.
8. Select Save to return to the Control Panel screen.
NOTE
The Sleep Mode setting cannot be less that the Low Power Mode setting.
NOTE
In European markets, the legally mandated EMC directive is to keep the Sleep
Timer setting below 1 hour (60 minutes).
Feature Timeout
The Feature Timeout option controls how long the current feature parameters will remain
in effect after the user action, such as a key press. The Feature timer can be set between
10 and 300 seconds. The default value for this feature is 5 minutes.
1. Press the Services button on the Control Panel.
The Services menu screen displays.
2. Select Machine Info.
5-17
Xerox
®
Wide Format 6604/6605 Solution
™
User Guide
System Administrator