Xerox Wide Format 6604 User Manual - page 149

NOTE

Refer to the maintenance process in Chapter 8 for cleaning the scanner prior to

scanning the normalization and stitch alignment originals. Cleaning the five Contact

Image Sensors, the Main Roller and the Pinch Rollers ensures improved image quality

if it has been some time since it was last done. Ensure the areas are fully dry before

scanning your originals.

NOTE

When scanning thinner or thicker documents, it may be necessary to use the Media

Thickness Control. This can be incorrectly diagnosed as a need for stitch alignment.

Stitch alignment is calculated using a normal bond thickness as the target, because

the precision of the stitch alignment process is dependant on the thickness of the

media.

Normalization

Normalization allows control of the brightness and color of the image. Normalization

ensures both image pixels and light intensity are synchronized.

Stitch Alignment

Stitch Alignment is needed when image line disconnects are seen in the scan. When the

intersection of the five Contact Image Sensors becomes visible on the image, the printed

image displays an upward or downward broken alignment in the lines.

NOTE

If the System Administrator password is enabled, the scanner setup tasks below

can only be performed by the System Administrator.

Performing Scanner SetUp routines:

1. Select Machine Info.

2. Select the Administration tab.

3. Select Copy Options.

5-31

Xerox

®

 Wide Format 6604/6605 Solution

™

User Guide

System Administrator