Xerox Wide Format 6604 User Manual - page 64
Delete Previous Image: You can delete the image data from the most recently
scanned original. This is a useful feature to modify one or more of the copy settings.
•
• Delete All Images: Selecting this button causes all the scanned images to be
deleted.
• Change Settings: Displays the Copy screen, enabling you to change the settings
(reduction/enlargement, original type, media selection, etc.,) from the Basic Copy,
Image Quality and More Features tabs.
• Media Status and Setup: This area is where you can set media type and size in
the printer while in the middle of a build job.
• Last Original: This selection informs the machine that scanning is done and
printing can begin. Select this button after the final original in the set has been
scanned.
5. If there are different types or sizes of originals in the set or you wish to select a
different media source or apply a different feature, use the Change Settings button
to display the Copy screen. This allows you to customize the settings for the next
original.
NOTE
The Copy screen now displays a Close selection in the upper, right corner. You
may select it to close the Copy screen and return to the Sets Build screen if you
choose not to make any settings changes for the next original.
6. Continue inserting the originals in the scanner and making the required copy settings
for each.
7. When the last original has scanned, select Last Original.
8. Confirm the copy quantity on the Quantity screen, or enter a new quantity using
either the numeric keypad or the scroll buttons.
9. Select Print on the Quantity screen.
The machine starts printing collated sets of copies.
Printer Interrupt
You can interrupt a print job to make a high priority copy. The interrupted print job
resumes after the copy job finishes.
1. Select Printer Interrupt on the Copy > Basic Copy screen while a print job is
processing.
The Printer Interrupt selection remains illuminated throughout the interrupt job.
Typically, no more than two prints exit the machine from the interrupted job.
2. When the suspended job stops, the Copy screen reappears.
3. Select the required copy settings.
4. Enter the copy quantity desired.
5. Scan the original(s).
Xerox
®
Wide Format 6604/6605 Solution
™
2-16
User Guide
Printing and Copying Documents