Xerox Xerox 4110 Getting Started - page 16
Xerox 4590/4110 Copier/Printer Getting Started
1-10
1. Product Overview
Power off
Perform the following to power off the machine:
1. Before switching off the power ensure that all copy or print jobs
have completely finished. Furthermore, ensure that the
indicator is not lit.
KEY POINT 1:
Switching off the power before copy/print jobs
are complete loses any data that is being processed.
KEY POINT 2:
Never switch off the power while:
– While data is being received
– While jobs are being printed.
– While jobs are being copied
– While a scan is being executed
2. Press the power switch to the off position [ ].
KEY POINT:
The power off process continues internally after
the power switch is turned off. Therefore, do not immediately
unplug the power cord from the power outlet.
NOTE: If you have switched off the power, wait ten seconds
before switching on the power again.
About the circuit breaker
This product is equipped with a circuit breaker.
The circuit breaker is normally
On
("
l
") position, as shown in the
figure. If power to the machine is interrupted, the circuit breaker
trips and the switch is in the
Off
(“
O
”) position.
If the breaker is
Off
("
O
") position, contact your Customer Support
Center as there might be some unusual conditions.