Xerox Xerox 4110 User Manual - page 27
Xerox 4590 EPS/4110 EPS User Guide
2-7
2. Paper and other media
Load paper in trays 3 and 4
For information about changing the paper attributes (size, weight,
etc.) and orientation, refer to “Change the size of paper trays” in
this chapter.
1.
Pull out the tray towards you until it stops.
WARNING:
When pulling out the paper tray, do it slowly. If
pulled out with too much force, the tray can hit and injure your
knees.
2.
Load and align the edge of the paper against the left edge of
the tray with the side to be printed on facing up.
KEY POINT:
Do not load paper exceeding the maximum fill line.
Doing so might cause paper jams or machine trouble.
Do not put paper or anything in the empty space on the right side
of trays 3 or 4. Doing so might cause paper jams or machine
trouble.
3.
If you changed the paper type, weight or size, enter this in
the Paper Tray Attributes window on the machine user
interface. Select [OK] to save the information and close the
window.
4.
Push the tray in gently until it comes to a stop.
M A X