Xerox Xerox 4112 System Administration Manual - page 184
Setups
9-26
System Administration Guide
Xerox 4112/4127 Copier/Printer
Paper Size
Standard-sized paper that is loaded into trays 3, 4, and optional trays 6 and 7 is automatically
detected. However, when a nonstandard size is loaded, it is necessary to specify the width and
height.
Tip
Depending on the paper size, the guide lever may not fit, and this may cause paper jams or
other errors. Tray detection may also not be possible. In such cases, use tray 5 (Bypass Tray).
Note
Trays 1 and 2 are preset at manufacturing at size 8.5 x 11 in. (A4); therefore, the paper size for
these two trays cannot be changed on this screen.
Paper Type
The Paper Type feature is discussed in Step 3. on page 9-27
1.
When selecting Paper Size, select Auto Size Detect or Custom Size (Trays 3, 4, 6, and 7
only).
Tip
Remember: You cannot select or set the Paper Size for Trays 1 and 2.
2.
When Custom Size is selected, enter the paper size using
S,T
, W, and X.
Auto Size Detect
Standard-sized paper loaded in trays 3, 4, and optional 6 and 7 is automatically detected.