Xerox Xerox 4112 System Administration Manual - page 246
Xerox 4112/4127 Copier/Printer System Administration Guide
8-106
8. Setups
Protocol Settings
Select the parameters that are required for communications
between the machine and client workstations. In
Protocol
Settings
, you can set the following items:
For information about port settings, refer to the following sections
in this guide:
•
TCP/IP (LPD/Port 9100) on page 2-1
•
Ethernet on page 3-5
•
TCP/IP on page 3-11
1.Token Ring - Transmit Rate
9.IPv4 - IP Filter
2.Token Ring - Maximum Packet
Size
10.IPv6 Address Manual
Configuration
3.Token Ring - Source Routing
11.Manually Configured IPv6
Address
4.TCP/IP - IP Mode
12.Manually Configured IPv6
Address Prefix
5.IPv4 - IP Address Resolution
13.Manually Configured IPv6
Gateway
6.IPv4 - IP Address
14.Automatically Configured IPv6
Address
7.IPv4 - Subnet Mask
15.IPv6 - IP Filter
8.IPv4 - Gateway Address