Xerox Xerox 4112 System Administration Manual - page 27
Xerox 4112/4127 Copier/Printer System Administration Guide
1-15
1. Product Overview
– While a scan is being executed
– While data is being imported from computer
2.
Press the power switch to the [
] side.
KEY POINT:
Power off processing is performed internally on
the machine for a while after the power switch is turned off.
Therefore, do not unplug the power cord from the power outlet
immediately after turning the power switch off.
NOTE: Before you turn the power back on after turning it off, first
make sure that the display has gone out.
Entering the System Administrator Mode
1.
Press the
Log In / Out
button.
2.
Enter the System Administrator ID with the numeric keypad,
and select
Enter.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
3.
Press the
Machine Status
button on the Control Panel.
4.
Press the
Tools
tab.
Log In / Out
button