XIEGU X5105 Instruction Manual - page 21
21
E.
Turn the knob again, select letters, numbers, characters, and press [>] to enter the
next letter position.
F.
Repeat fifth steps until the tag editing is complete. Press the [MENU] key for a second,
save the contents of the set tag and return to the normal operating state. In channel
mode, press the [MENU] button briefly, switch to the third page menu, press the TAG
function key, and display the label named for this channel.
*
You can press the TAG function key for a second, and you will transfer Menu #23
(
MEM
TAG
)
.
3.21 The menu system can personalize the transceiver and make it more in line
with your habits.
Operation method:
A.
Press the [MENU] button for a second and enter the menu mode.
B.
Press the [ V/A ] and [ A/B ] buttons to set the parameters you want.
C.
Rotate the knob to bring up the menu item you want to set.
D.
After the setting is complete, press the [MENU] key for a second, save the current
setting and exit the menu mode.
*
In the above fourth steps, if you press the [QUIT] button briefly, you will not save the
new settings and exit the menu mode.
Menu system description
Menu item
function
Set value
default
01
Filter 1 Fc
Filter 1 center frequency point (CW filter)
1M~100M
10.695M
02
Filter 2 Fc
Filter 2 center frequency point (SSB filter)
1M~100M
10.695M
03
Filter 3 Fc
Filter 3 center frequency point (AM filter)
1M~100M
10.7M
04
Filter 1 Bw
Filter 1 bandwidth (CW filter)
100Hz~100kHz
500
05
Filter 2 Bw
Filter 2 bandwidth (SSB filter)
100Hz~100kHz
2400
06
Filter 3 Bw
Filter 3 bandwidth (AM filter)
100Hz~100kHz
6000
07
RF Gain
Receive RF gain
10~100%
65%
08
CW Delay
CW T/RX switch delay
0~10000mS
500mS
09
CW Tone
CW transmit side tone frequency
200Hz~2000Hz
800Hz
10
SSB Tx Lv
SSB transmit modulation level
10~100%
50%
11
AM Tx Lv
AM transmit modulation level
10~100%
50%
12
NFM Tx Lv
NFM transmit modulation level
10~100%
100%
13
SSB Rx Lv
SSB receive audio gain
10~100%
50%
14
AM Rx Lv
AM receive audio gain
10~100%
50%
15
NFM Rx Lv
NFM receive audio gain
10~100%
40%
16
BackLight
Backlight brightness
0~100%
100%
17
Ref Clock
Reference clock frequency
1M~100M
26M
18
OutBand EN
Out of band permit
0~1
0
19
NFM Tx IF
NFM transmit if
1M~100M
10.697M