Summary of HTC 1946 HD
Page 1
User manual (eng).
Page 3: Contents
Htc 1946 & htl 4346 3 e ng lish contents safety instructions user manual, laser, power supply ...................................................................................... 4 antenna, pixel errors, service .........................................................................................
Page 4: Safety Instructions
4 htc 1946 & htl 4346 e ng lish safety instructions user manual follow the safety instructions and instructions in this manual. This manual should be kept safely for future reference. All instructions and warnings that are listed in this manual must be observed. Laser (htc models) the dvd player in ...
Page 5: Safety Instructions
Htc 1946 & htl 4346 5 e ng lish safety instructions the cable is jacketed and isolated power. Please make any objects on the cable, as this pro- tective function could be lost. Avoid large loads of the cable, particularly at plugs and sockets. If you want to pull out the plug from the socket, always...
Page 6: Safety Instructions
6 htc 1946 & htl 4346 e ng lish if the device has been dropped and if the product has power fluctuations. Use only original spare parts. Unauthorized substitutions may adversely affect the perfor- mance and reliability of the device. Please note the troubleshooting section (page 30) our service addr...
Page 7: Safety Instructions
Htc 1946 & htl 4346 7 e ng lish usb connection the tv requires possibly some time until the usb storage device is fully loaded and ready for use. Remove the usb device only when all the recordings or reproductions are completed. The usb ports on this device are not suitable for charging devices with...
Page 8
8 htc 1946 & htl 4346 e ng lish in case the products delivered are not free from defects in material or workmanship, mas electronic ag has the right to either repair or replace the defective product at its choice. Mas electronic ag manufactures and repairs goods using components which are new or equ...
Page 9: Device
Htc 1946 & htl 4346 9 e ng lish device 1 status led displays the operating status of the device red: standby, green: in operation, green / red alternately: pvr recording is in progress 2 stands de / assembly see page 12 3 breakpoints breakpoints for vesa mounting system (page 12) 4 dvd player i sta...
Page 10: Remote Control
10 htc 1946 & htl 4346 e ng lish remote control standby switches the device on / off or in standby source switching the signal source (page 18) 0-9 numeric keys for the channels direct dial fav displays the favorite list switches to the previous channel watched p.Mode predefined picture settings s.M...
Page 11: First Steps
Htc 1946 & htl 4346 11 e ng lish first steps installation make sure that you have when you install all the equipment off and disconnected from the mains securely. Read the instruction manual of the tv and follow the safety instructions there. Pay attention to a careful connection of the connectors. ...
Page 12: First Steps
12 htc 1946 & htl 4346 e ng lish stands the tv unit is supplied without its assembled base feet. For mounting the feet, you need a suitable screwdriver. Mount the feet with the accompanying mounting screws to the holes provided on the bottom side. Notes: insert for mounting the feet on the tv on a l...
Page 13: First Time Installation
Htc 1946 & htl 4346 13 e ng lish first time installation once you have the connection to the antenna or cable, press the power button on the remote control or on the tv. The television takes some time for the starting operation. The color of the led on the front will chan- ge from red to green. Afte...
Page 14: First Time Installation
14 htc 1946 & htl 4346 e ng lish channel type if you want to search for all (also encrypted) channels, or only free to air (fta) channels are included in the search. Servicetyp do you want to search for radio and tv channels (all), or only for radio (radio) or tv channels (dtv). Dvb-c channel search...
Page 15
Htc 1946 & htl 4346 15 e ng lish in the window that opens the channel scan. Channels found are listed as follows: tv analog tv channels dtv digital tv channels radio digital radio stations data channels with data information eg. Ota updates in the lower part you will see the progress of the station ...
Page 16: Epg
16 htc 1946 & htl 4346 e ng lish epg program information information about the current program is available by pressing the info button on the remote. In addition to information such as tv program title, date and time, current time, duration of the current program, the broadcast resolution (eg 576i)...
Page 17: Recording
Htc 1946 & htl 4346 17 e ng lish recording instant record 1. Connect a usb storage to the usb port 2. Make sure, that the usb storage is prepared for recording. 3. The system records a transport stream with the suffix ts. Select the desired program then press the rec button on the remote control to ...
Page 18: Signal Sources
18 htc 1946 & htl 4346 e ng lish av in you can connect further multimedia terminals with the tv via av in. Please press the source but- ton, choose „av in“ on the popup window and confirm with ok. Scart audio– and video signals from a vcr or a setop box can be transmitted by scart. Please connect a ...
Page 19: Signal Sources
Htc 1946 & htl 4346 19 e ng lish vga you can use the tv set as a pc monitor by using the vga interface. Please connect a vga cable with the vga input of the tv set and with the pc. With this kind of connection only video signals are transmitted. For listening sound on the tv you should establish als...
Page 20: Multimedia Player
20 htc 1946 & htl 4346 e ng lish the unit offers a video player. Connect a usb mass storage device for viewing your digital media into the usb input of the device. Press the source button on the remote and select the usb source. Now use the buttons to select the media type and press the ok button. N...
Page 21: Dvd Player (Htc Models)
Htc 1946 & htl 4346 21 e ng lish the device has an integrated dvd player. To watch a dvd, press the source button on the remote and select the dvd player as the input source. Slide the dvd with the printed side facing out (figure 1) in the dvd slot on the back of the device. The dvd is slot in autom...
Page 22: Dvd Player
22 htc 1946 & htl 4346 e ng lish by pressing the button d.Menu in dvd operation you can reach the settings menu. In this menu, you can make detailed settings for the device. To select using the navigation buttons. Press the ok button to confirm a selection. General setup page tv display picture form...
Page 23: Main Menu
Htc 1946 & htl 4346 23 e ng lish pressing the menu key to access the main menu of the device. Select using the directional buttons, the function icons. Press the ok button to confirm a selection. The following settings are available in this menu: channel opens the channel search when a tuner (satell...
Page 24: Main Menu
24 htc 1946 & htl 4346 e ng lish modus do you want the programmed timer repeat (daily, weekly) you can confi gure the replay here starttime configure the start / end time of the programmed timer signal informationen this menu displays information about the signal strength and quality of the selected...
Page 25: Main Menu
Htc 1946 & htl 4346 25 e ng lish procedure for the manual station search: use the ▲ / ▼ buttons from the first satellite, you want to set. Press the ok button. An arrow appears before the selected satellite. The arrow causes the satellite will be considered at the next station search. Press the ► bu...
Page 26: Main Menu
26 htc 1946 & htl 4346 e ng lish for the column of the tuning following configuration options are available: lnb typ define the oscillator frequency for your lnb . Please take the correct value from the manual of your lnb (standard:09750/10600) lnb voltage this parameter defines the storm voltage of...
Page 27: Main Menu
Htc 1946 & htl 4346 27 e ng lish when all settings for the manual station search configured press the blue button to search for chan- nels automatically according to your settings to start. The following search options are available: scan mode standard searches for stations on transponders which sto...
Page 28: Main Menu
28 htc 1946 & htl 4346 e ng lish noise reduction choose between preconfigured modes noise reduction (low, medium, high or off) sound sound mode choose between preconfigured audio profiles (standard, sport, movie, mu sic) or configure according to your wishes own settings (personal) for treb le, bass...
Page 29: Main Menu
Htc 1946 & htl 4346 29 e ng lish lock system lock global setting for the system lock function set password in this menu can be changed the default password "0000" with another 4-digit password. First, enter the existing password, followed by two time entering the desired password if the password fun...
Page 30: Troubleshooting
30 htc 1946 & htl 4346 e ng lish contact the xoro customer service: telephone: +49 4161 800 24 24 (mo-fr: 11:00 -17:00 uhr) email: support@ersservice.De ers gmbh elektronik repair service weidegrund 3 21614 buxtehude / niedersachsen germany troubleshooting please read the following information to fi...
Page 31: Energy Consumption
Htc 1946 & htl 4346 31 e ng lish energy consumption trade mark: xoro model name: htc 1946 hd energy efficiency class: b visible screen diagonal: 18,56“ / 47cm power consumption (on-mode, picture mode "standard"): 23w energy consumption 33,58 kwh per year, based on the power consumption of the televi...