Xoro HTC 1946 HD User Manual - Signal Sources
18 HTC 1946 & HTL 4346
E
ng
lish
AV IN
You can connect further multimedia terminals with the TV via AV IN. Please press the SOURCE but-
ton, choose „AV IN“ on the popup window and confirm with OK.
SCART
Audio– and Video signals from a VCR or a setop box can be transmitted by SCART.
Please connect a SCART cable with the SCART input on the HTC TV set and with the
SCART output on the VCR or setop box. Press the SOURCE button, choose „SCART“
in the popup window and confirm by the OK button.
HDMI
HDMI transmits digital audio and video signals. Please press the SOURCE button,
choose „HDMI” in the popup window and confirm by the OK button.
Supported resolution:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p (24Hz,
50Hz, 60Hz)
Supported audio formats:
PCM (stereo)
Component
You can connect further multimedia terminals with the TV via YPbPr. Plug one end of the video adap-
ter cable into the YPbPr jack on the TV, and the other ends (3-wire video components) to the RCA
jack of your multimedia device. Please pay attention to the coloured coding of the cable, inputs jacks
(adapter cable) and the video output jacks (source):
“Y” with the green wire or RCA plug
“Pb” with the blue wire or RCA plug
“Pr” with the red wire or RCA plug
With this kind of connection only video signals are transmitted. For listening sound on the TV you
should establish also a sound connection. You can take the AV IN port for the sound. Please press
the SOURCE button, choose „YPbPr“ on the popup window and confirm by the OK button.
Press the SOURCE button on the remote control you can
switch between different input sources. Use the ▲ / ▼ the
signal source and confirm your choice with OK.
Satellite
Opens the built-in DVB-S2 satellite tuner.
DTV
Opens the built-in Combi DVB-C / T / T2 tuner.
ATV
Opens the built-in analog tuner