Xoro HTC 1946 HD User Manual - Main Menu
24 HTC 1946 & HTL 4346
E
ng
lish
Modus
Do you want the programmed Timer
repeat (daily, weekly) You can confi
gure the replay here
Starttime
Configure the start / end time of the
programmed Timer
Signal Informationen
This menu displays information about the signal strength and
quality of the selected satellite.
CI-Informationen
Displays, depending on pickled CI module, information or
configuration menu. Further information on the Common
Interface slot, refer to page 29.
Dish Setup / Manual Search
Opens the menu for manual tuning. To be able to perform a
channel scan is successful, you some information about your
reception system must be known:
On which satellite your antenna is aligned?
If you have multiple antennas or an antenna with
several LNB you need to know what kind of switch
(Toneburst or DiSEqC) you use and on which port
which antenna / LNB is connected.
Ask the installer of your antenna system according to, if you
some parameters should not be known. If you live in rented
accommodation, please ask your landlord.
Are the reception parameters known, you can download a
manual tuning as follows perform:
On the left side of this screen you will see a list of satellites,
for the TV is prepared. On the right side you will see the set-
tings for the satellite you have selected on the left side. In the
middle of the well-known for the satellite transponder
(transmission frequencies) are listed.
Navigate with the ▲ / ▼ buttons within the column to select
the satellite, the transponder or the setting option.
With the / keys to move between the columns.