Xoro HTC 1946 HD User Manual - Safety Instructions
HTC 1946 & HTL 4346
5
E
ng
lish
Safety instructions
The cable is jacketed and isolated power. Please make any objects on the cable, as this pro-
tective function could be lost. Avoid large loads of the cable, particularly at plugs and sockets.
If you want to pull out the plug from the socket, always pull the plug, not the cord. The cable
could otherwise tear.
If you do not use the device for an extended period, be sure to unplug the power cord.
To protect the unit during a lightning storm or when it will be unattended, unplug the power
cord from the wall outlet and the antenna cable from the antenna socket. This will prevent
damage due to lightning strikes.
Do not overload outlets, extension cords or any other cables, as this may cause fire or
electric shock.
In the openings of the appliance No objects should be introduced, because in some places
current flows and the contact fire or electric shock can result.
Never remove the cover - there are no parts inside that can be repaired by the user.
Operate the device only with the supplied AC adapter.
Antenna
The analog and/or digital TV tuner are connected to an antenna.
If you want to connect or disconnect the antenna, please turn the power off before and unplug
the power cord from the outlet.
If you use the device in conjunction with an external antenna, make sure that this is grounded
according to regulations.
If you do not use the device for an extended period, please disconnect the antenna cable.
An outdoor antenna should not be placed near power lines or other electrical circuits. When
attaching such antennas extreme caution because of the contact with such lines can be fatal.
Pixel errors
The defined on this page has defective pixels (bright, dark pixels, line defects and differences in
brightness) describe the maximum allowable defects in type and number, which are excluded from
the warranty.
Bright pixels (Bright Dot)
≤ 3
Dark pixels (Dark Dot)
≤ 6
Light + Dark pixels
≤ 6
Service case
Perform repairs never even through, please do not leave this always qualified personnel. Contact the
repair service in the following errors:
If the power cord is defective.
If objects have fallen into the unit.
When the unit come into contact with liquids or penetrated into the
equipment.
When a substance or an object accidentally penetrates the ventilati-
on slots.
If the unit does not work application. Change only the settings that
are described here.