Yamaha 2012 Griizzly 700 YFM7FGPB Owner's Manual - page 101
of
174
8-19
8
3. Remove the quick fasteners, and then push
inward on the areas shown.
To install the panel
1. Place the panel in the original position, and
then install the quick fasteners.
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
3. Install the seat.
1. Panel H
2. Quick fastener
2
1
Tightening torques:
Carrier bolt (upper):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (lower):
53 Nm (5.3 m·kgf, 38 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
U1HP10E0.book Page 19 Thursday, March 24, 2011 4:11 PM