Yamaha 2012 Griizzly 700 YFM7FGPB Owner's Manual - page 107
of
174
8-25
8
TIP
Skip steps 5–9 if the oil filter cartridge is not being
replaced.
5. Remove panel F. (See page 8-10.)
6. Remove the oil filter cartridge with an oil filter
wrench.
TIP
An oil filter wrench is available at a nearby Yamaha
dealer.
7. Apply a thin coat of engine oil to the O-ring of
the new oil filter cartridge.
TIP
Make sure that the O-ring is properly seated.
8. Install the new oil filter cartridge with an oil fil-
ter wrench, and then tighten it to the specified
torque with a torque wrench.
1. Oil filter cartridge
2. Oil filter wrench
1. O-ring
U1HP10E0.book Page 25 Thursday, March 24, 2011 4:11 PM